Search results

  1. J

    Just thought I'd share a few pics of my build

    1967 coupe, 393 stroker, TKO 500, ford 9" 3:27 posi, ride tech stage 2 air bag suspension,19x8 and 19x10 iforged aero wheels. A lot of other goodies too. Let me know what you think.
  2. J

    New brake lines, for disc/disc setup question

    I bought a new disc/disc master cylinder from street or track (st-mc). I'm basically Running all new lines to all brakes and want to make sure that I'm doing this correct. Run a line from the rear port to a brake tee and out to the front brakes. The front port goes to a porportioning valve...
  3. J

    393 stroker, chose of intake

    I've got a 67 mustang coupe with the stock hood, and I want to keep the stock hood. Here are the specs: 393 stroker, flat top pistons, 210cc procomp heads. Cam spec is, gross lift with 1.6 ratio, .544 intake, and .5568 exhaust. Duration @ .050" tappet lift, 234 intake and 240 exhaust...
  4. J

    393 stroker, stock oil or aftermarket high volume

    I have a 67 mustang couple. So I'm trying to figure out if i can run a stock oil pan with my 393 stroker. Will that hold enough oil to keep it safe, especially if i use a high flow oil pump? The only reason why i would want to use the stock pan is because i plan to lower the engine 1/2" with...
  5. J

    95 cobra tranny, how do you distinguish the difference

    How can i tell if a tranny came from a 95 coba. This guys is selling me a tranny and says its from a cobra. the tag on it reams something like f something zr something. Do the cobras have a certain number. Need help asap, if it is a cobra tranny, i want to pick it up. Thanks
  6. J

    will 18 x 9's fit up front on a 67 stang

    With the correct backspacing, will 18.9's fit up front with no flaring of the fenders. The wheels i want only have 18x9's up front, i need to know if they will fit under the original fender. I plan on lowering it alot too. Anyone got pics of this?
  7. J

    Mustang steve cobra brake mounting plates

    Any body got prints, or dimensions for these brackets for a 67 mustang. He doesn't sell them in steel, i already asked. I would feel more comfortable using steel brackets. If you have a print or dimensions, i can just machine one out myself. thanks. Also, anybody running 18 x 9's up front...
  8. J

    Will tranny is a t45. Will it fit in a 67.

    WIll a t45 bolt up to a 302 from a 93 mustang. Fabbing i can do, but just wonderin if this will bolt up using the same bellhousing.
  9. J

    need info on rear end length

    Ok, i've been doin a search and my eyes are hurting now from reading. I'm trying to figure out what the rear end length of all the mustangs. Whats the stock rear end length of a 67, what is it for the 85-93 mustang, and 94-97 mustang. I'm tryin to figure out if the 94-97 rear end will fit in...
  10. J

    67 mustang 6cylinder to 8 cylinder ? Help

    Got a couple of questions, i know most of the answers for a 65/66 stang, but this is my first 67 stang. Ok, i have a 67 6cylinder with power steering. I need to put the stock 5 lug spindle and hub on, what year spindle and hubs can i get. Are the 65/66 brakes the same for the 67/68, 69? Will...
  11. J

    Anyway to get rid of the smell out of the breathers

    Right now i have breathers over my valve covers because they make the engine look nicer. But i hate the fumes that comes out, and usually ends up inside where i can smell it. I'm about to just take off the breathers and put on pcv valves and a hose back to the carb. But that doesn't look...
  12. J

    Will brakes from a 69 fit on a 66.

    This guy is selling the spindles, calipers, rotors, master cylinder that he pulled off of his 69 mustang. Will this stuff fit on a 66? Are the lower ball joints the same size? Its a pretty good deal at 250 but i don't want to get it unless i know it will fit a 66 mustang. I haven't seen it...
  13. J

    MSD distrubutor, iron or steel gear

    I have a 302 roller cam engine from a 95 gt. I am running a carb setup on it, currently i have a msd ignition with a bronze gear. I know that the gear is wearing out. I also know that i should replace it with the steal one, but what about the iron one. Can i use an iron gear with this cam...
  14. J

    Something to look at, pics on my cardomain site

    Had a bunch of pics and some free time. Check out the car, its a work inprogress. What do you think. Also, what color do you guys like. I was thinking of a light green, almost silver looking color. Or, a tangelo orange color. http://members.cardomain.com/jae902
  15. J

    Alternator wiring question, need some help.

    The alternator that i have is out of a 88 5.0. I am trying to wire up this alternator to my 65 stang. The unit works good, i brought it to kragen and had it tested. Now my questions are about the wiring. There are 6 wires, 2 of them go together and go to a battery source, 1 wire jumps from the...
  16. J

    Total Control Products, where to buy?

    Heres the situation. My buddy ordered his tcp rack and pinion from mustang depot about 2 weeks ago. Just called mustand depot today to find out the status, only to find out that mustang depot cannot get anything from them anymore and recieved a refund for his purchase. Called mustangs plus...
  17. J

    65 mustang, what are some good front shocks

    Don't know what kind of shocks to get for the front. My 65 has the 620 pds springs, its lowered( tires slightly tuck alittle on the front), the rears i have kyb gas a just, 1 1/8 front sway bar. I want to make the car ride somewhat smoother. I don't want to make it stiffer than how it is now...
  18. J

    ? about t5 tranny/drive shaft and fluids

    Just dropped in my motor and t5 tranny. I also have the drive shaft that came with the tranny from a 88 gt. Thinking that it would be long and probably need to be shortened, i went to place it in and it fit perfectly. The yoke was out about 1 inch and the thing lined up perfectly. Is that...
  19. J

    What are the two sensors on a T5 tranny

    I have a t5 tranny from an 88 5.0 mustang, there are two sensors on the tranny. What are they and are they important? Do i need to hook them up. Thanks.
  20. J

    TCP motor mount replica's

    Motor mounts that work just as good as TCP I would love to have the total control motor mounts but there kinda expensive. My friend has a set right now that i'm looking at. Looks just like some steal welded together. I showed a machine shop the tcp mounts, they said they could make me a set...
Top Bottom
Back
Forums
Menu