Search results

  1. 9

    Junkyard Gt40p Questions

    I'm about to do a gt40p head swap what all can I reuse on the swap and what do I need new valve train wise. Can I use the stock ho motor lifters and pushrods? What rockers can I use the gt40p explorer rockers or can I use the rockers off my e7 heads? Last question is what will I need for valve...
  2. 9

    which motorsports cam

    Ok help me out here is my build so far its an 83 gt with 89 Lincoln lsc 5.0 roller completely stock internals other than high volume oil pump and double roller timing chain. Bolt ons are edroneock dual plane intake bbk equal length headers 2.5 inch h pipe and flowmaster super 44 mufflers dumped...
  3. 9

    need help and your thoughts / Motor mount-engine position Q?

    ok heres the deal i got an 83 mustnag gt. i have put a 89 roller motor in it, converted it from 4 speed to a t-5, ford motor sports blowproof, bell housing stock motor mounts and stock trans mount, BBK 1-5/8 equal length shorty headers, i also instaled a unisteer manual rack and pinion along...
  4. 9

    gears

    ok back in the day i bought an 8.8 with 3.27 gears for 50 dollars i just traded that for one with 4.10 gears good deal eh? anyway what on a guess would an 83 gt with a t-5 top out around with 4.10s. .... also i bought a few new parts... super duty t-5, bbk shorty equal lengths, aluminum drive...
  5. 9

    TP sensor

    whats all involved in replacing my tps on a 93 mustang 2.3 to me it looks like i need to remove my throttle body just wondering
  6. 9

    another t5 question(s)

    since i realized the t5 i got isnt a world class and it needs a rebuild anyway i figured id just give up on that and buy a new world class or something. i was looking in summit and the got a ford racing super duty 5 speed. it this the same thing as the z rated trans? if so or if not whats...
  7. 9

    stock head question

    how can i plug the back of the heads where the smog pump tube enters if i remember correctly there is a certain size bolt thet fits on these holes if so what size and thread pitch or how would you recomend plugging the heads. oh its on an 89 302 ho
  8. 9

    radio antena

    has anyone on here uses the rear defroster as your antena? i wont be using car n winter so rear defrost isnt something im worried about having, but i think looks on my car would improve if i shaved the antena. how would i go about doing this? or is there another way?
  9. 9

    351 cleveland

    ok my friend and i are taking on a new project (in some time) a 351 c in an 84 mustang the question at hand is are there any aftermarket heads out there for this motor? also ohter things like blowers, stroker kits blah blah blah
  10. 9

    nitrous question

    ok i got an 89 HO roller motor in my 83 gt with some minor mods the internals are all stock my question is how much of i shot of nitrous can i run and still be safe i was thinking about a 75 hp shot will that be safe? will more be safe?
  11. 9

    eliminated smog pump got a question

    i eliminated the smog pump on my gt my question is will my alt. bracket support everything ok or should i run a bracket from the smog pump mounted to the engine block? also what company would you recomend to get a a/c or p/s delete (idler pulley and bracket so i can run the serp belt a lil easier)
  12. 9

    too sweet to pass up

    i got an 8.8 posi rear out of a 90 mustang today for 50 dollars complete from drum to drum. if i read the tag right it was 3.27 gears i want to know how much of a difference that would be in acceleration over my 3.08 gears. eitherway im still happy cause im getting rid of my 7.5 rear now
  13. 9

    Help i have gone import

    Its ok im still a ford guy i just recently bought an 83 yamaha Maxim 550 i have always wanted a bike so i got one. but now that i got your attention has anyone ever ran those el glow gauges. i saw an article on them in the new 5.0 mag and i think they look kinda cool but i want opinions on...
  14. 9

    maf size probably asked a million times by now

    lets say a freind of mine has a 70 mm mass air would it harm performance if i throw it on a 91 gt that is completely stock? except a cold air that may also go on
  15. 9

    starting problems

    when hot my 78 dont kick over all the time if i shut it off i have replaced the starter, starter cable, ground cable. im leaning towards maybe a bad battery or alternator not charging enough. oh yeah the old and new starter just engaged but wouldnt turn the motor. car is a 302 w/ c4 trans...
  16. 9

    t5 question

    i should know this cause i used to work in a trans shop but i removed and installed them instead of rebuild. but how hard can it possibly be to rebuild a t5 my 3rd gear whines and its annoying as hell. i dont wanna shell out the cash to have someone rebuild/repair it id rather do the work on...
  17. 9

    installed my manual rack

    hey i installed my manual rack today it was an east straight up install. i bought it from wildride race cars. the kit is not flaming river though i bought a kit from unisteer which included the rack, steering shaft, and tie rod ends no rack bushings tho. but the part im getting to is the best...
  18. 9

    turbo coupes!!!!

    well i was talking to a guy i work with today while we stood by my hurt stang and he asked if my car had a 2.3 turbo so of course i frowned and said no. so he told me that he has 2 88 turbo coupe t birds one is an r title with a bad trans body is decent on it, the other has a nice body but a...
  19. 9

    rear seat delete kits

    where can i find a rear seat delete kit for a 79 to 86 mustang hatch back or should i just remove it and let it be maybe build my own kit
  20. 9

    waaaaaboooommmm

    yeah thats about the sound i heard on the way to work this morn when the car behind me couldnt stop intime damn wet roads. well anyway she slid under my car and sent me airborn hit me so hard the hatch cover flew off and so did the piece around my ac heater controlls. however hard that is. so...
Top Bottom
Back
Forums
Menu