Search results

  1. mo_dingo

    Fuel 95 Gt - Issues Draining The Fuel Tank

    I hooked up an adapter to the schrader valve port on the fuel rail and installed a vinyl tube to drain the fuel out of my fuel tank. IIRC, I left the tank full when I parked it in the garage. It's been a few years since I have driven the Mustang, and I did not use fuel stabilizer. The gas is...
  2. mo_dingo

    1995 Mustang Gt Heavily Modded For Sale

    Please see my craigslist posting for further information. http://tucson.craigslist.org/cto/3215265869.html My e-mail is [email protected] if you wish to contact me about the car. Thanks!
  3. mo_dingo

    Front Main Seal Problem

    Well I did some searching but to no avail. My front crank seal is spraying oil everywhere. The timing cover and seal are brand new. Installation of the seal went without a hitch. It has leaked ever since day one. I am wondering if there is something else I can do except replacing the seal...
  4. mo_dingo

    90" is the short belt to bypass smog pump

    90" is the correct length belt to bypass the smog pump only with factory pullies. The correct routing is attached. A 90.5" would be a bit easier to install, but I felt safer with the 90". I only wanted to make this thread for information. I read many different threads and got many different...
  5. mo_dingo

    RTV on head gaskets = how bad?

    I know it's a bad idea. But I am just curious if anyone has actually done it and can report actual problems or lackthereof. I was helping a guy at work try to get his motor back in his blazer after being rebuilt. Just when we get the motor mated to the transmission, I noticed a bit of blue...
  6. mo_dingo

    Service Manuals???

    Anyone sucessfully downloaded one? I am having problems with a couple links I have received. Can someone PM me a link, or e-mail me the manual. It has so many helpful diagrams/pictures!!! I just can't live without it! Scott
  7. mo_dingo

    C&L MAF sample tube question

    So I bought the 73mm c&L MAF and it's supposed to have a purple calibration tube for the 30lb injectors. But I took the sample tube out of the maf, and it's solid aluminum, with a small bit of sharpe marker on the back (kinda looks purple). Is there supposed to be a plastic insert in the...
  8. mo_dingo

    Wiring Diagrams???

    Anyone have a complete wiring diagram for the mustang? There are tons of pages in the haynes manual, but I can't find one consolidated diagram with the fuse block as one. I searched here and corral, so I don't think it's here. Scott
  9. mo_dingo

    Aftermarket Timing Chain Cover

    If you need to replace your timing cover, and you don't want a junkyard part, here is a link (brand new). http://www.midwayautosupply.com/detailedproductdescription.asp?18072 Dorman is the manufacturer, actually made in china. Part number is DOR-635-106. Ran just over $100 with shipping...
  10. mo_dingo

    Just some quick info

    For those who wish to delete the EGR, I took my headers down to a pipe fitting place in town, and they told me the threads are M22 1.5 thread pitch. So if you want to plug the egr, that is the fitting you need. It was pretty cheap too. Nice and effective way to bypass it. I am going to cap...
  11. mo_dingo

    Couple questions while doing my new shortblock.

    I have three questions. First, is it normal for stud mount FRPP rockers to be at different heights? Meaning that some caps are screwed down further down the stud than others. This is obvious when you look at the depth of the alan stop screw inside the cap. Second, what thread is the hole...
  12. mo_dingo

    Finally caved in...

    After many months of my car not running (coolant mixing with the oil) I have decided to not try to get the block fixed, and go with a new short block from DSS. Here is the invoice. http://www.filelodge.com/files/hdd5/119353/DSS%20Estimate%203-29-06.pdf Everything is forged (except the crank)...
  13. mo_dingo

    Got boost

    Got boost????? :rlaugh: Scott
  14. mo_dingo

    Just a rant, ignore if you wish

    So I am bored at my house watching My Classic Car with the guy and his curly-q mustache, and they show a 1940 Ford delivery car, fully restored. Except he wanted a big block, so they moved the firewall back a couple inches and made a custom dash..... So what big block did he put into the...
  15. mo_dingo

    BBK tuned length header installation write-up inside!

    * UPDATED 12-18-04 * Well, because of the difficulty of this task, I decided to make a write-up on this subject. The car was my brothers 2003 GT. Tools: Besides your basic set of sockets, full set of combination wrenches, pry bars, etc... You need some specific tools for the job. I...
  16. mo_dingo

    BBK shortie header install questions!

    This weekend my brother and I are going to install the BBK shorties on his 03 GT 5spd. I need any and all tips available to make the job more expedient. We already installed a Magnaflow o/r x-pipe and cat-back. So we don't need any help removing the x-pipe. For those who have done them, if...
  17. mo_dingo

    Steeda Sports Spring Install

    We're having trouble removing the strut tower. We removed the three bolts and had a jack under the a arm but it seems like it is stuck. One of the bolts is still sticking through a little and we have tried tapping it through but no luck. We dont have to remove the bolt in the center of the cc...
  18. mo_dingo

    Spider webs in the paint!

    I made this thread in sound @ shine, but it seems like no one cares!! If you have any experience with this, please post. http://forums.stangnet.com/showthread.php?t=500783 Thanks!! Scott
  19. mo_dingo

    Spider Webs in the paint!!!

    Well, I decided to tackle my paint problem this weekend. I planned on getting an orbital buffer like THIS one. There are many swirls in my paint. If I can get those out, I would be extremely happy. But, the worst part is the hood, and one section above the rear/left tire. There are spider...
  20. mo_dingo

    Just got $700....Now, what to do??? *LONG*

    Funny story actually *LONG*. Skip this if you like. Cliff notes are below! My friend calls me and asks if I want to go to the local casino. I tell him no, because I would just waste the little money I had. He tells me that he was at the casino the day before, and won $3500!!! My jaw dropped...
Top Bottom
Back
Forums
Menu