Search results

  1. roworld

    Expired 88 T Top 306

    For sale 88 t top gt 5sp. Ive had this car for four years. Now its time to move on. Pros: The engine was rebiult to a 306 with forged pistons about 3 months ago. It has gt40p heads with trick flow valve springs, trick flow tfs1 cam, bbk ssi intake manifold, mac pulleys, bbk shorty headers...
  2. roworld

    Fox 32 Valve Heads For Sbf

    I just found a video on youtube (looks like a old video) of a company called Arao engineering that makes a 32 valve head for the sbf. Has anyone heard of this and how come its not catching on. Its seems like the performance gain would be alot compared to any aftermarket 2 valve head.
  3. roworld

    Fox Fuel Pressure Problem

    I have a 88gt with gt40p heads, tfs1 cam, bbk ssi intake, #24 injectors, c&l 80mm mass air with blue sample tube, and 70mm tb. For some reason the car wont say running unless I turn the fuel pressure up above 55lbs. I know thats way too high. Has anyone else ever had this problem?
  4. roworld

    Engine Help

    I have a 88 gt it has a 306 bottom with gt40p heads ,bbk shorty headers, bbk ssi intake, and bbk 70mm tb. About 2 weeks ago I started having problems with the idle. It would surge then die. I thought it was due to the lack of fuel so I installed a set of 24lb injectors from a mark viii and a c&l...
  5. roworld

    306 Won't Idle

    I just put together a gt40p 306 combo. I'm having problems with my idle. It idles fine as long as I don't drive it hard. If I drive hard it begins to surge. My mods are 19 pound injectors, bbk ssi intake, 80mm tb, 373 gears, tfs1 cam and Ram xd clutch. Does anyone have a clue as to what may be...
  6. roworld

    Fox Speedo

    I noticed yesterday that my speedo only works while im accelerating. Has anyone else had this problem. Could the problem be in the instrument cluster or in the tranny?
  7. roworld

    Fox Help

    So I just put my car back together yesterday. Its a 306 w/ gt40p heads, tfs1 cam, bbk ssi intake, #24 injectors, 73mm c&l mass air w/ the blue sample tube. The problem Im having is that the car will start but it wont stay running. I have to keep my foot on the pedal to keep it running Ive...
  8. roworld

    Expired BBK ssi intake

    Im selling my bbk intake $300. I paid $650 for it new. Call or text 443-529-6159 for more info.
  9. roworld

    Wtb 2 03 Cobra Wheels

    Im looking for 2 17x8 or 17x9 polished 03 cobra wheel. Im located in Baltimore.
  10. roworld

    Drivetrain Its Time For A New Clutch

    My clutch went up on my last week and ive been online pricing a new clutch kits. There are so many clutch kits on the market that its hard to choose. So far the best bang for the buck I can find is the Ram HDX for $199. It should hold up to 450hp thats about the same as my king cobra that just...
  11. roworld

    4 Banger Turbo Swap

    Has anyone tried swapping in a 4 cylinder turbo motor other than fords 2.3
  12. roworld

    Ignition Problem

    Im having a problem with my 88gt. sometimes it wont rev pass 4k and starts to back fire from the exhaust even while im driving. If I cut the key off then right back on it goes way. I just did the mass air swap and its the same if not worst. Im thinking maybe its a ground problem. How many...
  13. roworld

    88 gt 4sale

    Im selling my 88 gt. Its blue with black interior t top 5sp pwr window and door locks. The bad: The windshield, speedo cable, lower intake gasket needs to be replaced. The hood has a few dings. The good: It has 3.73 gears in the rear, rear disc brakes, 5 lug conversion, subframe connectors...
  14. roworld

    turbo on explorer block

    Is anyone running or has every ran a on3performance turbo setup on a stock explorer block. Im asking because i've read that those pistons are not forged and are weaker than the pre 91 blocks.
  15. roworld

    Megasquit

    Has anyone here use megasquit on a n/a fox build. Im about to do a mild build on my 88 gt and I was wondering is it worth going with megasquit. I plan on going turbo at some point. Im still running a speed density eec. Would it make more sense just to grap a a9l.
  16. roworld

    Carb'd dohc 4.6

    Has anyone here swapped a carb'd dohc 4.6 into a foxbody. If so what kind of budget do you need for that kind of project and was it worth the trouble.
  17. roworld

    50/50 weight

    I just read a article on the mustang svo. The article states that the reason the engineers desided to use a 4 banger in the svo mustang was to get close to a 50/50 weight distribution as posible. I know that with a k member swap and aluminum heads alot of weight can be removed from the front of...
  18. roworld

    Home made subframe connectors

    Ive been doing some searching and I now have all the demensions I need to make my own subframe connectors. Now I just need to find some 1"x2"x1/8" tube in the baltimore area. This project depends on if it can be done for less than I would pay for some subframe connectors new.
  19. roworld

    rear drum to disc

    I just installed rear disc brakes from a 96 v6 mustang on my 88 gt. Everything fits well except the soft lines from the calipers to my hard lines are way too long is their any other ones I can use from a different year mustang that maybe shorter that will bolt to my calipers.
  20. roworld

    play in steering

    Ive been trying to figure out how to solve the play in my steering wheel. Ive narrowed it down to the pivot bearing on my steering column(88 gt w/ tilt wheel). The problem is I cant seem to figure out how to take it apart. Ive removed the steering wheel and right below the main bolt their is a c...
Top Bottom
Back
Forums
Menu