Search results

  1. 1991vert

    1991 Convertible Top Frame Question

    So I need a gasket that attaches to a piece of the top frame. It's the channel that runs vertically along the rear of the quarter window. I'm not sure exactly what that piece is called. It's removable with 2 bolts attaching it to the frame . The gasket piece is riveted to the unnamed piece...
  2. 1991vert

    Convertible Top Motor

    Anyone know if I can purchase an o-ring for the reservoir? I replaced both of the lift cylinders and when I went to remove the fill plug, it broke. Half of it fell inside the reservoir so I split it open to remove it. I purchased a new plug, lubed the o-ring and reassembled. Well all of the...
  3. 1991vert

    FS: Siemens Deka 60lb injectors

    I have for sale eight (8) Siemens Deka 60LB hi-impedance injectors. These are the EV-1 style plug. Can be used on newer model vehicles with an adapter plug. These have a few dyno pulls and a few street miles. These definately have less than 500miles on them. I've upgraded to 80lb...
  4. 1991vert

    what to do with stock h-pipe?

    so i've had my stock 4cat h-pipe kicking around my garage for the past couple years. i used to use it for emissions, but i have no need for it anymore. should i bring it to a scrap metal place and get money for it? or should i list it online/locally? (pain to ship) dunno what these things...
  5. 1991vert

    Should I add Meth to the car?

    As of now, the car puts down 630rwhp/565rwtq. We saw 15psi at the top of the runs with a 3.5" upper and an 8" lower. I bought a smaller pulley(3.0") before my previous tune and the way things were going (power-wise) it would've been +/- 700rwhp and I would've maxed out my injectors. So I...
  6. 1991vert

    17x7 wheels, what tires?

    17x7 wheels for the front...what size tire? does 215/45/17 sound right?
  7. 1991vert

    FS: 18x9 Chrome Saleen Replicas

    Selling four (4) 18x9 chrome Saleen replica rims. 24mm offset (6" backspacing). Small spot on the REAR of 1 of the rims from rubbing on the a-arm. Face of the rims are mint, no curb rash. Rears have BFG drag radials (original tread) with 95%+ left on them, which i will leave on. Asking $600...
  8. 1991vert

    FS: Chrome Saleen Replicas

    Selling four (4) 18x9 chrome Saleen replica rims. 24mm offset (6" backspacing). Small spot on the REAR of 1 of the rims from rubbing on the a-arm. Face of the rims are mint, no curb rash. Rears have BFG drag radials (original tread) with 95%+ left on them, which i will leave on. Asking $600...
  9. 1991vert

    Dyno #'s are in

    car made 603rwhp/586rwtq and was still going. it made more boost than i thought it would and it probably would've went to 20psi. then i would've ran out of fuel. going back next monday...hopefully it will be a little cooler. still has more in it 95* with 33% humidity overall i'm pretty happy
  10. 1991vert

    heater core question

    any ill effect to NOT running the restrictor in the heater core?
  11. 1991vert

    Fuel level gauge...

    My fuel level gauge is reading full at all times, even with the sender unplugged. i checked the ground in the rear from the sender and it's good. when i turn the key off, it drops. i thought maybe the gauges were grounded at the firewall where the strap goes from the block to the firewall so...
  12. 1991vert

    Canister Purge Solenoid

    How does the charcoal canister purge solenoid work? There are two wires going to it: Grey/Yellow and Red. I'd imagine one is positive and one is negative? Does this receive power while the key is on? The reason I'm asking is because I do not have a stock ECU or main wiring harness so there is...
  13. 1991vert

    Contour Fan Wiring...

    what size fuse do I use? and is a 75amp relay too big? or does the relay not matter
  14. 1991vert

    Airbag wiring

    I ditched the stock ecu/main harness for an aftermarket computer. By doing so, i lost a few connectors that were part of the main harness. If i go from the crash sensors upfront and match the wire color at the box could i just go straight from the crash sensor to the box? or would this...
  15. 1991vert

    Kill switches...

    show them to me :D i'd like some ideas where to mount mine.
  16. 1991vert

    Where does this connector go?

    So I pulled out my dash completely and moved the harness out of the way. I routed the harness along the dash support and plugged everything back in, except this little guy... it's pretty much right above the radio/heater controls i'm hoping someone could tell me by the wiring...
  17. 1991vert

    Coils

    last part of the ignition system... im running an MSD digital-6 box, crank trigger, and an msd distributor. stock ignition is no more. which one to get? they all cant be created equal
  18. 1991vert

    rant

    getting ahold of someone seems nearly impossible. i'm trying to find a replacement indicator light for a hurst roll control unit and can't seem to get ahold of anyone! all i want to do is talk to a person, but i keep having to push numbers and eventually end up at a voice mail :mad: /end rant
  19. 1991vert

    help with a few connectors...

    so i have a few "left over" connectors :rolleyes: i have a brown 8pin connector near the booster. does this go to the main harness? also i have my crash sensors...i only managed to find the plug for the driver's side. where do the center and pass. side crash sensors connect to? thanks
  20. 1991vert

    MSD 6AL or Digital-6?

    been looking at these 2 and i'm not sure if the digital-6 would be over kill or not motor: 363 AFR185's jay allen billet cam tfs box-r 90mm accufab novi2000 F.A.S.T. XFI expecting 650-700RWHP one of the last things i have to buy. i'm also running an MSD crank trigger setup...
Top Bottom
Back
Forums
Menu