Search results

  1. cmb91LX

    Cruise control help 92GT

    The cruise control on My little brother's car is not working. We have checked fuses, all good. Brake lights work, horn works, cig lighter, etc, etc. We will be trying the vaccum at the brake pedal tomorrow, however, when we attempt to turn on cruise, shouldnt we at least see a light come on of...
  2. cmb91LX

    97 Cobra vs 06 C6, a little fun

    So I had just got my new MT ET radials put on the Cobra Saturday and I was coming home down the "track" and in my rear view mirror I see a car speeding quickly to catch me in the "staging lanes". As the car got closer I saw it was a new vette. I have been curious as to how my car would run...
  3. cmb91LX

    97 Cobra wont start

    ok, let me start by saying the Cobra always takes 2 times to start. The first time, it starts then dies withing 5 seconds. The 2nd time it usually stays running and warms up. Today, 30 degrees, I go out to start it and it dies the 1st time, no biggie, then it wont start period. It just turns...
  4. cmb91LX

    Built in spell and grammar check?

    Can the admins apply some sort of spell check to the end of each post or something? soemtimz i feelz liek I is talksing to folks dat kant speel
  5. cmb91LX

    My new 4v, whatcha think?

    http://www.cardomain.com/ride/2048617 the wheels and wing will be off by this weekend, replaced with Black fr5s and probably a 94-95 Cobra wing
  6. cmb91LX

    Cobra seat compatability?

    I just picked up a 97 Cobra and have access to the 10th anniversary Black w/red insert Cobra seats. I have heard they swap directly and I have heard they dont fit. I am wanting to do fronts and rears. Someone please give me a definite answer, will they fit and what needs to be done to make...
  7. cmb91LX

    Blown 96-98 Cobras, I have a few Qs

    Ok guys, I just picked a 97 Cobra yesterday: 97 Cobra Black/Black(newly aquired) Procharger P600B,90MM MAF, 30LBs, Dynospeed tune, Pro 50 shifter, 410s, Dr gas, 2 Chamber flows D&D tubular K and A arms, Steeda LCAs, FRPP uppers M/M camber plates 420/435 at the wheels . I have...
  8. cmb91LX

    Help me choose clutch, factory pedal feel preffered

    OK, I need to get a clutch to get this 91 back together FINALLY. Combo is: 306 9:1 AFR 165s 73MAF, 65TB Edelbrock upper/lower with spacer 24LB inj tremec, alum d/s 373s long tubes, etc triax and Steeda quadrant ,cable, f/w adjuster weight reduction, kmember, coilovers, etc The...
  9. cmb91LX

    Assistance in Aligning K-Member

    OK, 91 LX, just got a killer little drivetrain setup for the car for dirt cheap. The car already has the QA1 coilovers, A-arms, c/c plates, etc, etc. I figured while I have the drivetrain out would be a good time to go ahead and change out the K-member. My only concern with this is ensuring it...
  10. cmb91LX

    A9L vs A9P

    Maybe you guys can clear up some things for me. My 91 had a 5 speed originally with an A9L processor. We took out the 5 speed and put in an AOD. I was under the impression that the A9L that was with the 5 speed wouldnt work so I found a guy with an AOD car and bought his processor, it was an...
  11. cmb91LX

    AOD help needed quickly

    OK, here is the scoop. 91LX, @3100LBS, 306, forged pistons, AFR 165s, EDEL Performer intake, 65 TB, 73MAF, 24LB inj, NO AC, NOsmog, NO PS, 373 gears, alum driveshaft, 17 inch wheels and a 100shot Behind all this is a freshly rebuilt to factory specs AOD with factory converter. It is shifted...
  12. cmb91LX

    306 with AFR 165s, need cam and rocker advice among other things

    -------------------------------------------------------------------------------- Hi guys, I need some advice. I just purchased a fresh 306 with AFR 165s on it. The only thing I know for sure is that the engine has cast crank, H-beam rods, and aluminum pistons and it was set up for a power...
  13. cmb91LX

    M Yount or other experts, will these fit?

    Alright, I have finally ordered my QA1 front end kit, have the Baer Track 13" brakes front and touring 12" in rear on Baer supplied 5 lug axles, IRS is on hold for now. Now it is time to get the wheels to bring it all together. The car is a 91 hatch/Saleen clone with BOSS cyberstallion hood...
  14. cmb91LX

    Will QA1 tubular A arms fit with stock Kmember

    as the title says, will the QA1 tubular a arms w/ coilover kit work with the factory 91 kmember? any possible interferences or snags?
  15. cmb91LX

    IRS in foxbody, can it be done

    Like the title says, can it be done? What is involved, is it worth it? ANy modifications needed for frame , brackets, driveshaft, etc? Is it even worth the trouble?
  16. cmb91LX

    Will these wheels fit my fox? specs inside

    Ok guys, I am going with the Baer Track kit 5 lug kit for my fox which retains factory track width without pushing the wheels out like an SN95 conversion. My question is will the Saleen Speedline knockoffs fit the car. Specs are: front 18x9 5.95" backspace (+24mm offset) rear 18x10 6.35"...
  17. cmb91LX

    Baer 5 lug Disc conversion Qs

    If I purchase the Baer front/rear Track/Touring disc kit w 13"fr and 12"rear discs with new axles included, wil a 17x9 bullet wheel fit on the back? WHat about an 18x9 saleen type wheel? I am trying to get away with this without having to roll the rear fenders and run 275/40s on the back? Does...
  18. cmb91LX

    How many spark plugs in 2.3L 4cyl`

    I know this is a stupid Q, but someone thinks that the 91 4CYLs have 8 spark plugs, is this true?
  19. cmb91LX

    AOD GUYS HELP/ EXTERNAL COOLER Q'S

    Ok , here is the deal. I have an AOD just put in my 91 and I am going the external cooler route. Problem is, I do not have the quick connect fitting to go in the fluid cylinders on the side of the trans and I dont know where to get them. Do any of you guys have a particular kit on your car that...
  20. cmb91LX

    value of vortech?

    What is the value of a 5 or 6lb unadjustable Atrim vortech , one of the first units available for the fox cars. The impeller shaft is broken/missing and the rest is there. Self contained, entire blower housing, impeller and ball bearings. 150-200 maybe. Should I even buy it, it is worth the...
Top Bottom
Back
Forums
Menu