Search results

  1. M

    strut tower brace

    If i remove my aftermarket strut tower brace, do i need to get a realignment? I remember i tried to remove one of the bolts and it just kept turning and turning like a nut was held from underneath. is it easy to remove these?
  2. M

    what part is this off my car??

    It came off my 2000 mustang gt. I wanted to know how much it is worth and what is it?
  3. M

    bleeder brake hose

    nm
  4. M

    brake caliper bolts

    I cant get the 2 15mm bolts off the caliper from the spingle on the front brakes. It is literally impossible, I have no leverage. I am trying with a 3/8" driver that is small/short and now Im going to try with a 1/2" driver with a 15mm. I am going to get a 15mm tommorow for 1/2" driver. I got a...
  5. M

    brake hoses

    What size vacuum cap do i need to put over it when i disconnect the front brake line so it does not keep leaking brake fluid?
  6. M

    bleeding brakes

    Ok, i want to replace my stock front brakes back to stock and i need to replace the hoses. So i remove the 2 front calipers by taking the 15mm bolt on. Some said I need vice grips to remove the bolts?? Will a lot of brake fluid come out when i disconnect line? How do i stop the fluid from coming...
  7. M

    how much??

    I have laying around mustang ac lines. I tried looking the part # up but no match. Here is a pic. What exactly is this? How much is this? They were removed and replaced when i got my supercharger in, then I took off supercharger and did not have to put these back in, since I have a heat...
  8. M

    Saleen wing

    Will a 99-00 saleen s281 wing fit a 04 mustang gt? I have the saleen wing on my 00 GT and my friend has a 04 gt that wants it. Are they the same mounting holes and will his 04 GT stock factory wing fit on my 2000 gt if we swap? I dont want any holes showing. I see them make a 01-04 saleen s281...
  9. M

    front brake install

    Now i want to take my brembo brakes off the front and replace them with stock GT brakes. Now I saw some write ups and im replacing the brake lines also back to stock. Now what is with the vice grips needed to remove the caliper? Is that only if your removing stock calipers up the right? Do i...
  10. M

    autometer fuel pressure gauge removal

    I see that it has the adapter that goes into the schrader valve. Do I need to get a new schrader valve for my 00GT? If I unscrew that piece from autometer wont it spray out fuel and has no valve like it is stock? I unplugged the gauge that goes to it and took out guage, but left that adapter...
  11. M

    Air Filter

    When i remove my blower off my 2000 gt, i do not have the stock air filter for that black box. Can I just use my k&n that is attached to my pro m meter or do i need to get the stock cone one that fits the black box?
  12. M

    oil pan

    Anyone have a 99-04 oil pan for a mustang gt? I know the 99-04 cobras or mach 1 's have the same oil pan. Someone please
  13. M

    Swapping vortech supercharger

    If i want to go back to stock on my 2000 gt, with the idler pulleys I have 1 stock one laying around. I know 2 idler pulleys go back to stock locations. The pulleys on my car now, are they vortech pulleys the ones that need to be swapped? Am I suppose to have 2 idler pulleys laying around. I...
  14. M

    Taking supercharger off

    How hard would this be able to do? What do I have to replace back to stock besides intake, maf and fuel injectors? I am selling car and want to part of what I can.
  15. M

    Shifter noise

    Is my transmission going bad?? My shifter in the center console makes drivetrain noise kind of. Its annoying when im just driving around. What is this from? Do I have to adjust my firewall adjuster somewhat or something. It vibrates and just makes like that grinding noise, but i dont think its...
  16. M

    Balanced tire

    I just got 1 of my wheels/tire mounted/balanced, since i had to swap it because of a nasty ding in my rim and tire. So I got a new tire and wheel, the guy said the rim i got was kind of bent so you might get vibration behind the wheel or whatever. I didnt get any vibration or anything, but I...
  17. M

    Trunk

    When i close the trunk, it still has some movement like if i pull it up, but its locked. I also cant put my key into the trunk hole to open it, it wont go all the way in.
  18. M

    so who knows about steeda quandrant??

    I looked under the car and its on the 1st hook more towards the engine, I want to pull it and bring it to the next hook. Do I have to make it really have some slack from the firewall adjuster first?? See the problem is Where I want it grabbing in the middle, it has slack and it rattles when foot...
  19. M

    discount coupon

    What was the coupon code for mustantuning to get %6 off? I know the %5 one.
  20. M

    Clutch cable

    If I jack up my car and take dust shield off for bellhousing and tightning that clutch cable, can I make it more snug if it has slack underneath the car?? The thing is that it rattles and hits against the metal. I have tried the steeda clutch pedal adjuster, but I cant set it perfect. I have the...
Top Bottom
Back
Forums
Menu