Search results

  1. stprorolla49

    Electrical Cooling Fan / AC Issue, please help!

    I'll try to give the abbreviated cliff notes version of the story, please bare with me. Keep in mind these have been very intermittent issues. Last summer I started having issues with my cooling fan. I was blowing fuses randomly, the cooling fan wasn't working, a/c was causing the idle to...
  2. stprorolla49

    New Pics Of Dhg Bullitt 4113!

    I went out on Saturday between battling my fan issues and shot a few pics after I detailed it. I didn't have time for a complete correction, just a wash/clay/wax, although it really doesn't need it...I'm just anal as hell. Here's my favorite pics from the shoot, enjoy! Shot with a Canon...
  3. stprorolla49

    Electrical High Speed Fan Working Intermittently, Help!!

    Let me preface this by saying, I have had constant intermittent fan issues for the last 3-4 months. It started out with the car blowing the 50 amp fuse in the engine bay fuse box. I replaced the fuse a few months ago, and had no issues for about 2 months. Then about a month ago, I blew 2 fuses...
  4. stprorolla49

    New Pics And Dyno Video Of Dhg 4113...blown!

    It has been WAY too long since I've posted on here! In case you guys aren't up to speed (no pun intended) I collected parts for a Novi 2000 build since last October, and I just recently installed all the parts and got it tuned by Kevin Hand @ Wicked Motorsports in Ocean, NJ. The car made 404/398...
  5. stprorolla49

    Do I Need A Bap?

    I've got everything together right now to get my blower project started in 2 weeks, and I really would like to know if a BAP is necessary for my power level. Here's my combo: Novi 2000 @ 9-10 lbs (3.25" pulley) CX Racing 3" core intercooler, 3" piping VMP HPX slot MAF Vortech MiniRace BPV 03...
  6. stprorolla49

    Novi 2000 Build started!!

    Last week i pulled the trigger on a Novi 2000 headunit, bracketry, braided oil lines, and all hardware. It was such a great deal for an excellent condition blower that i couldnt pass it up. I still need te discharge piping, powerpipe, injectors, maf, fuel pump, pulley, and gauges. I figure i can...
  7. stprorolla49

    Difficulty sourcing Novi 2000 parts? Advice please!

    Over the winter I am going to begin piecing together a blower kit for my '01 Bullitt. I'm looking at Vortech V-1's and Novi 2000's. I found a great deal on a Novi 2000 headunit, oil lines, 12lb pulley (which ill replace with a 9 or 10lb), and the brackets and hardware for $1000. I am somewhat...
  8. stprorolla49

    New wheels on the Bullitt!

    I needed new tires and figured now is the time to upgrade my wheels if I wanted to. I LOVEE the stock Bullitt look, and wanted to keep it clean and simple so I got a set of 18x9 and 18x10 Anthracite Bullitt's wrapped in 265/35/18 Nankang NS-2's and 295/35/18 BFG KDW's from OE Wheel in FL. Great...
  9. stprorolla49

    '01 Bullitt and '98 GT Rolling Shots!!

    Well after 2 weekends of work on my buddy Jon's '98, it is finally ready for some pics! Last weekend, I painted his wheels, during the week he swapped in a new rear and SVE adjustable LCA's, and this weekend he mounted the wheels and I chopped a 1/2 coil off his front springs to make the stance...
  10. stprorolla49

    WTT: 17x9 and 17x10.5 Bullitts for 18x9 and 18x10 Bullitts!

    I am interested in trading my 17's up to a set of 18's. Mine are in MINT condition, the barrels are spotless, as are the faces. I always keep CG wheel sealant on them so they stay nice. I am ANAL about my wheels. Many people on here have seen my car in person and can vogue for the mintyness of...
  11. stprorolla49

    Starting off the spring right!! (Smoke show content)

    Last night we had a little bbq at my buddies house and I felt the sudden urge to melt some rubber since it was such a gorgeous spring evening! The first attempt is total N00B!! I completely forgot about the traction control since I don't really do burnouts in my car and I always leave the...
  12. stprorolla49

    Body Repair in CT?

    Last week some dumb bitch hit my car in my parking lot at my apartment, and obviously didn't leave a note since that seems to be the cool thing to do nowadays. The damage isn't terrible, but it's more damage than can be touched up and lived with. There is a 4-5 inch long dent in the passenger...
  13. stprorolla49

    Got a job, moving to CT...yikes!

    Well all the persistence payed off and I got the job that I've wanted for over a year! I'll be working at KMCA, an architectural model and prototyping firm in New Haven, and I'll be living in the Westville area. So who lives up there and what is there to do mustang wise...meets, shows, auto-x...
  14. stprorolla49

    *Official "What you got for Christmas" thread*

    It seems like I make this thread every year, but I'm always curious what kinda goodies everyone gets! For the Bullitt: MM Urethane bushing kit from the gf, Chemical Guys stuff from my brothers, a 1/2" Craftsman torque wrench from my pops, and a Craftsman drop light and Craftsman ODB2...
  15. stprorolla49

    Job Search - Maybe you can help

    Ok, short background story on me: I graduated with honors in May from the Savannah College of Art and Design with a BFA degree in Industrial Design. Two months after graduation, I landed a sick job at a toy design firm about 25 minutes from my house. I worked there for almost 3 months, and a...
  16. stprorolla49

    Project: Harness Bar - PICS!

    Project: Harness Bar - PICS! *UPDATE* The last few times I've auto-x'ed my car, I've gotten a little frustrated with how much I float around in the seat. Side to side, the bolsters on the Bullitt seats are great, but getting on and off the gas so frequently throws me back and forth in the seat...
  17. stprorolla49

    Speedcal Calibration help!!!

    When I installed the built '03 Cobra IRS in my Bullitt, there were FRPP 4.10's installed in the carrier which was awesome because I wanted 4.10's and was going to get them installed regardless. Anyway, I bought a used Brothers Performance Speedcal from a respected member on Corral, and...
  18. stprorolla49

    My Bullitt and Friends TL - PICS!!

    Today was a beautiful day so my friend Jon and I went out to grab some shots. My car was freshly detailed last weekend and sitting under the cover all week, and*Jon wanted some cool pics of the TL, so we hit up the local parking garage. Enjoy!
  19. stprorolla49

    Slight IRS Wobble

    About a week ago, I swapped an IRS into my Bullitt from an '03 Cobra. Whenever I'm on the highway at speeds above about 50mph, I get an intermittent slight swaying of the car to one side or the other. The only way I can really describe it is that the car sort of feels like it's tramlining, but...
  20. stprorolla49

    New Mods on the Bullitt w/ pics (IRS Content)

    Last weekend a guy from SVTP and I swapped my SRA for his built IRS out of his '03 Cobra. What a deal! Straight trade for both of us, he really wanted the SRA because he had 600hp and didn't want to blow the IRS, and I wanted a better ride and better handling. I traded my solid axle, Magnaflow...
Top Bottom
Back
Forums
Menu