Search results

  1. bertman

    Electrical Where Is It

    In the pic that i posted, can anybody tell me where that risistor is and its purpose. I have an 87 mustang. Just curious
  2. bertman

    Engine Belt Routing

    Can anybody tell me what belt i need. I have A/C eliminater kit and it moved the PS pump up to where the A/C was. Summit told me what belt to use, but its not right. I have no smog pump either. The belt is 84.5 inches and its to long
  3. bertman

    Forced Induction Injectors

    I know your supposed to have a certain size throttle body, MAF and injectors. Its supposed to a watch set. Can somebody help me and tell me where i can find it. Its been a long time since ive been up here. Thank you
  4. bertman

    Rear Suspension

    I have seen a little shock on the rear end. It bolts the top of the rear end and bolts to the wheel well.My car is a 87. I dont have them. I saw it on a 91 stang the other day. It looks factory. Im not talking about the control arms or the rear shocks. Does anybody know what they are called and...
  5. bertman

    MAF Conversion

    :shrug:I have an 87 stang. Car had a but load of wiring issues. I replaced the ECM main wiring harness and the wiring harness behind the dash. Both came out of a 93 5.0 Will I still have to do the MAF conversion. I have an A9L computer.
  6. bertman

    clutch chatter

    Have a 66 mustang GT 350. I have put a Hayes clutch a new flywheel and replaced Ujoints and driveshaft and have replaced the clutch rod. I still have a bad clutch chatter when I take off from a dead stop. If the car is rolling a little and I take off in 1rst it doesnt chatter.Please help its...
  7. bertman

    history question

    Read in a magazine that they only made a few true 5.0 T-top mustangs. I need to know if this is true because I have one. Mine is an 87. Also if it is true how can I find out how many they made and what number was mine when it was built. I hope someone can help me.:SNSign:
  8. bertman

    engine performance problem

    Lastnight on the way home my car started to run like crap. When I got home I opened my hood hood while car was running and I noticed one of my header tubes was glowing red the plug wire was arking on the header also. That was the only tube that was glowing. What could cause that. HELP:shrug:
  9. bertman

    Here are the codes I got

    I pulled the codes out of my car and here is what they are 31 EGR code 67 Clutch Switch open. Not worried 81 Thermactor Air diverter 82 Thermactor Air bypass 85 CANP 95 Fuel Pump Monitor circuit problem I know why I have 31,81,82. Dont have egr valve on the car. I have a blocking...
  10. bertman

    Exhuast leak question

    Is there a visible way to see if your header gasket is blown. I dont see it. Also I have a broken header bolt. The last one on the passenger side outside of the valve cover. Stupid question. That couldnt be my exhuast leak could it. I wouldnt think so but thought Id ask anyways:bang:
  11. bertman

    rear end difference

    Have 65 mustang that had a 289 in it. Also have a 66 that has a inline 6 in it. The outside of the rear end look the same. Are they. And if they are what is the difference between the 2:SNSign:
  12. bertman

    fuel pressure Question

    My car 87 stang. When I shut my car off my fuel pressure drops. When is sits for a few hours it dropsdown very low. As soon as I turn the ignition on the pressure comes back up and the car starts fine. Is the fuel pressure supposed to drop a lot or what. If its not supposed to can someone help...
  13. bertman

    Interior

    :SNSign: Getting ready to rip my whole car apart interior and motor. Where is the best place to get any interior stuff.All parts. Car has been hacked together by previous owner. Car has many issues. Wiring and little motor issues. Going to re wire the whole car. motor side and inside. I will...
  14. bertman

    conversion

    I have a 66 stang with an inline 6 Have a 3speed manual in it now. Want to put a c-4 in it. Will it bolt up and what mods do I have to do:Zip2:
  15. bertman

    T-5 to AOD swap

    Have an 87 . With a T-5 in it. Want to swap it out with an AOD. Will the crossmember thats in it work or do I have to change it. Also the driveshaft. Will that work as well. Want an automatic in it. Can get the tranny for free and the T-5 is junk.:SNSign:
  16. bertman

    another starting prob

    Got in my car lastnight and went to start it and didnt start. Cranked over fine. Check fuel and its good. Checked spark and nothing. Straight off the coil it only sparks once when I crank it over. Tried another coil and same thing. Never seen this one before.
  17. bertman

    Starting Problem

    Car starts up fine when its cold. After its been running for a while and the temp gets around 160 I shut it off and try to start it back up the starter drags. It will turn over real slow a couple of times then turn over fine and start. I have had the starter rebuilt , replaced the starter wire...
  18. bertman

    Question About IACs

    If I unplugg my Iac and the car dies does that mean the IAC is bad. I am having trouble with the idle surging. Replaced the TPS Cleaned the IAc but it still does it. I am going to print out the Surge checklist but someone answer my question about the IAC
Top Bottom
Back
Forums
Menu