Search results

  1. 9646gt

    Bad Tob Or What?

    So the car is a 95 GT that had a new king cobra clutch kit with oem cable upr firewall adjuster and upr (I think) quadrant and a MM clutch height adjuster. This was all done about 5 years ago by Kenny Brown and the car did a lot of sitting and only has about 1,000 miles on it since the install...
  2. 9646gt

    Odd code 176

    Ok so the car is a 95 with explorer intake bbk CAI under drive pulleys and MSD ignition with full exhaust. The town I am stationed in is about 4100 feet above sea level. When I drive to the next town over about 40 miles or so into the trip there is a huge hill/pass with pretty rapid elevation...
  3. 9646gt

    A/c Stopped Working Suddenly

    Ok so the car is a 95 GT of course with 187k. AC is all original. For the past two months the a/c worked. It took a few minutes to get good and cold but it worked pretty darn good. The previous owner said he had to refill it every two or three years but had not had to in a while. I plan to...
  4. 9646gt

    Current Before And After Pics Of My Project :)

    So the car is my 95 GT I just bought with 185k on the clock. It was in pretty bad shape appearance wise and had a couple small mechanical issues. I will eventually make a thread of all I have done even tho it is nothing special really. Anyway, I still need to do interior pictures and stuff but...
  5. 9646gt

    Can't Figure Out One Bolt On Edelbrock Elbow And Explorer Intake

    Ok so I am getting very upset. The explorer intake needs to go on asap so I can drive my car again. I just got from fedex today my summit 70mm TB and edelbrock sn95 elbow adapter. I have it oriented like in the following pictures. The FORWARD BOTTOM bolt is impossible to figure out. That one...
  6. 9646gt

    Engine Which Gasket On Explorer Intake?

    My explorer intake has a internalegr in the upper and lower. Which gasket set do I need so It will be blocked off? Some say felpro 1250 but I heard there is a felpro 1250s that is metal core and much better but I don't know which version I would need for my stock port size? It does have egr...
  7. 9646gt

    Urgent Need Lower Intake Manifold!

    Anyone have one sitting around going unused that's still good? I will pay a reasonable price for it and will pay you to overnight it! I found them on ebay for like 50 bucks but none can be over nighted. Anyone?!? I know this should go in classifieds but I need it now as I need my car running...
  8. 9646gt

    Finally Got Another Stang! 95 Gt

    Ok so I don't have pics yet because I won't have the car for about another week and a half, but I am too excited to wait to post! I have previously had an 89 LX 90 GT 96 GT and an 01 GT. I sold the boosted 01 GT last year because I got bit by the handling bug when I rode in a buddies s2000. I...
  9. 9646gt

    Will a prochamber have leak problems?

    Ok so today and I said the hell with the leaky ass Pypes mid-pipe and put on my stocker and now it's driving me crazy because it's to quiet lol. I am seriously thinking about buying a prochamber if I can get a decent deal on shipping it to 99702 in Alaska (MAC want's about 90 bucks). But here is...
  10. 9646gt

    Just some new pics....

    One of the perks of living in Alaska is right now we have prety much daylight till 10PM and will have 24 hours soon. It's a warm 43 degrees out so I figure why not take some pics! The shot of my fog lights looks odd because of the white balance setting I used. Made the HID fog lights look a bit...
  11. 9646gt

    PPRV Delete guys come in...

    If you did a PPRV delete on a focus pump did you have any trouble getting the fuel hose over the plastic nipple on top of the basket that has the two barbs on it? Mine would only go so far then it blew off in the tank. Tried going directly to pump and blew off there too because there is no barb...
  12. 9646gt

    Innovate lc-1 wideband install help

    Ok so I got everything wired up for the lc-1 and the analog gauge. I am still confused on the button and LED. I am to the point where it says switch on the 12V source for 20 seconds without connecting the o2 sensor. It says the LED should flash a 2 flash pattern or whatever during the 20 seconds...
  13. 9646gt

    Please give me comments on these wheels stangnet!

    Ok so the car is a 01 Mineral Grey GT as seen here I want Black Chrome 03 Cobra wheels but can't figure out wich setup to order. I am looking at these two wheels: First it's the normal 17x9 And then the 17x9 that has jsut a slight Deep Dish (not the overkill look of some of the...
  14. 9646gt

    Mail order tune of for CMS stg 1 cams?

    Ok so in short I am wanting to get a set of CMS stg 1 cams but am stationed in Alaska where there is no place for a dyno tune. I was thinking of getting the sniper special forces tuning software but am now thinking I should order an xcal3 from someone like brenspeed since I can get a mail order...
  15. 9646gt

    Exhaust video of my 01 Pypes O/R X and flows

    I know, most people hate flows with the O/R X. I am not sure what series mine are and they are just weld ins. I think it sounds mean as hell. Not sure how this sounds with the degrading of youtube but it sounds mean as hell on my ps3 going into a surround sound! Sorry the vid sucks but can't...
  16. 9646gt

    83 GT with t-tops..how many ?

    Just curious how many 83 GT's with t-tops were made? I can't seem to find the right production number anywhere. One for sale here for like 1500. Thanks if you can help me and a buddy out who is thinking of buying one...
  17. 9646gt

    help with exhaust leak after x pipe install! Remove studs?

    Ok so first off I should note that I don't think the pipe I took off my car is the stock piece. It was a catted H pipe but with only 4 cats and I didn't really find any markings. I was under the impression our cars had 6 cats. Any way, I installed an O/R x pipe by Pypes and now I have a horrible...
  18. 9646gt

    is this ranny noise normal?

    So I got a 01 GT with the t-45. When taking off in first gear normal driving I hear a sound that's hard to describe. It's almost like the sound of fluid moving around or if you were to very faintly lug the engine a hair. Kinda jsut sounds like everything is turning. The tranny shifts like brand...
  19. 9646gt

    new pics of the ride and video..56k...wait for the beep

    Well I thought I would finally post some updated pics of the car...only mods so far are o/r x (awaiting install) flows Trickflow plenum and summit 75mm TB K&N filter steeda springs white face gauges chin spoiler and grill delete (CDC brand from I think AM notice the loose fitment..makes me sad)...
  20. 9646gt

    anyone still selling the plates for the IAC that got rid of slow dropping rpm's?

    Just as the title says. I had one of these on my 96 and it helped great for engine braking and such on twisty roads and made the exhaust much more alive. Let me know if they can still be had. All I found in search function was the 7 page thread from 2003 heh
Top Bottom
Back
Forums
Menu