Search results

  1. Waz900

    Electrical Starter blowing mega fuse to trunk battery

    Hey guys, I think I found the solution to my problem, but I wanted to get other peoples opinions before I move forward with it. I moved my battery to the trunk. I have 1/0 ground and power wires going to the battery. I have it grounded in multiple locations in the front and back of the car. My...
  2. Waz900

    Microsquirt timing issues

    Hey guys. I'm a beginner with this and I think i've turned myself around so much that i'm not sure how to correct my issue. Any advice would be appreciated. Its an 88 GT with a microsquirt. This is a brand new build for me, so I am working off of the stock tune in the microsquirt. I had it...
  3. Waz900

    Drivetrain Clutch fork/throwout bearing/cable adjustment

    Hey guys, I would like to get your opinions. I am putting my 88 5-speed car back together. Aside from the t-5, everything is brand new. MDX clutch, throwout bearing, clutch fork, pivot stud, Maximum Motorsports cable and quadrant, and firewall adjuster. The car previously had a junk cable and...
  4. Waz900

    Electrical Dakota Digital Gauges and VSS in a mass air converted car

    Hey guys. I installed my Dakota Digital dash cluster, but I want to make sure my thinking is correct on this. My car is an '88 5-speed GT that had factory cruise control (so it has VSS) but it was factory speed density (no VSS pigtail to transmission). When I got the car, it was converted to...
  5. Waz900

    Electrical Running relays and the contour fan

    Hey guys, This topic has been covered a lot in many different ways, but I didn’t see a concrete model that matches mine and I would also like feedback from people who know more than me, so I wanted to ask for insight on my “design.” I’m wiring my contour fans to a Derale PWM controller. I...
  6. Waz900

    Cannot Find Remanufactured Front Calipers

    Hey guys, I am in the process of rebuilding my '88 t-top car. I wanted to replace the front brake rotors with remanned ones from Rock Auto or some other parts warehouse. I am still 4 lug, and I have an '88 Turbo coupe rear with factory rear discs and 3.55s ready to go in, so I am going to...
  7. Waz900

    Brakes Foxbody SN95 Booster install Question

    Hey guys, I’ve read just about everything out here on the SN95 booster install on a Fox. I have an 88 that’s had the whole front end replaced from what I believe was an aero-front year car. I’ve shortened the studs, elongated the holes, and I’ve spent plenty of time trying to wiggle this thing...
  8. Waz900

    Fox rear coil-over vs. traditional spring opinions

    Hey guys, I've tried to go through various threads looking for opinions about rear coil-overs vs. traditional springs, but I didn't get my exact answer, so I wanted to post. I picked up a set of used Bilstein struts with the Maximum Motorsports coil-over kit on them for $75. They are in great...
  9. Waz900

    92 Mustang does not start, nothing seems to work

    Hey guys, i'm having some trouble with my 92 5.0 and i'm not even sure where to begin. It isn't my daily driver and it hasn't really been driven in the past 6 months or so. I went to start it today and got NOTHING. Ok so I initially thought it was the battery, so I had it charged. Now when...
  10. Waz900

    License Plate Lamp Screws

    Does anyone by any chance know what size screw goes to these? They are the covers for the bulbs that light up the license plate on 87-93 foxes. I tried searching for it and I went to a local hardware store and tried a few different sizes but to no avail. Thanks in advance.
  11. Waz900

    Door lock actuator rivet

    I tried looking in the search but didn't see everything that I needed. I need the rivet that attaches to the frame of the door for my drivers side door lock actuator. I was replacing my old actuator when the white clip that it sits in snapped in half, so now i have to have a new one riveted to...
  12. Waz900

    5.0 Dash Cluster Problem. Need HELP

    Hey guys I had a blown bulb in my dash and I am doing the 5 speed swap next year. I changed the bulb and moved the speedometer cable. The car started up once. I turned it off and tried it again and it won't start. It tries to turn but it never kicks over. Is there something I am missing...
  13. Waz900

    Stock Forged Pistons in 5.0's

    Hey guys, correct me if I am wrong (which could very well be the case :nice: ), but didn't almost all 5.0 mustangs up until midway through 1992 have forged pistons in them? I cannot recall where I read or heard that. If so, is there any way you can tell what you have without ripping the motor...
  14. Waz900

    A/C Compressor Question

    Hey guys, i'm thinking about tryin to fix my A/C myself, but I want to see what someone more experienced thinks about it. The car has already been converted to R134a but the compressor is bad. I tried changing the a/c cycling switch but it did not fix anything. I want to take my compressor...
  15. Waz900

    Paint question for you Black interior guys

    Hey, I've been following up on all you guys that are painting your interiors black and I decided that i'm going to experiment with the option myself. Which kind of Dupli-Color paint did you guys use? I have seen the Dupli-Color Flat Black and Gloss Black Interior and Vinyl paint and I have...
  16. Waz900

    Intake Advice

    Hey Guys, Here's what I am wondering. At this point my 5.0 doesn't really have that many mods on it, but it will down the road. I am looking into buying an upper/lower intake and i'm not sure which one to get. I was going to get the cobra intake, but if I eventually do too many mods I might...
  17. Waz900

    T5 Question, What would you do?

    I'm going to be doing the t5 swap next year and I am not sure if I want to buy a trashed transmission and have a local shop totally rebuild it, or if I want to buy one online that is "already rebuilt." Does anyone know a ballpark price for what it would cost to have a t5 rebuilt at a shop? If...
  18. Waz900

    AOD to t5 swap question

    I'm planning on doing the aod to t5 swap when the next tax return check comes around next year. In the meantime I am reading absolutely everything I can about this install. I honestly am not that mechanically inclined, but from what I understand this swap is really more nerve-wracking than...
  19. Waz900

    Englishtown Swap Meet

    Has anyone gone yet? Any Details? I heard it is mostly Chevy parts. I was planning on going tomorrow but I don't want to make the trip if it is going to suck for Mustang Parts.
  20. Waz900

    GT40P Valve and Spring questions

    I'm looking into picking up a set of GT40P heads but they are bare. I couldn't find any kind of kit that has all the parts in it to complete the heads. Does anyone know of such a thing or does anyone have any recommendations as to what parts to get? My mods are in my sig, nothing special...
Top Bottom
Back
Forums
Menu