Search results

  1. Bosko5.0

    Cleaning Convertible Top

    If it is vinyl and has mildew on it . 20% bleach 80% water then wash with car wash soap to get all the bleach off. If cloth DON'T use bleach. Use Raggtopp. Raggtopp is a good product but expensive.
  2. Bosko5.0

    Battery Light?!!

    Check the wiring pigtail on the alternator. My light is coming on because the white wire keeps popping off and grounding itself.
  3. Bosko5.0

    Kenny Brown Suspension - Who Here Is Using It?

    I've got stifflers Subframe connectors fit system well worth the money.
  4. Bosko5.0

    Suspension Irs Swap From 03 Cobra

    You have to drill 4 holes in the trunk for the reinforcement like said above. And you'll have to run two hard brake line from the rear brake line to the frame rail so the cobra soft lines hook up to Also you either have swap the pinion flange on the differential with the SRA or swap out the...
  5. Bosko5.0

    Convertible Top Interchange

    I'm pretty sure what changed is they added a rubber tube above the windows to deflect water better. Black tops look great.
  6. Bosko5.0

    Impact wrench options

    I run a Matco 1/2" impact and a 3/8" butterfly impact on a 13gal or a 5gal with no problems.
  7. Bosko5.0

    Car is missing above 2k rpm after hot.

    The egr was sticking, causing the computer to pull timing.
  8. Bosko5.0

    Plz Help, arcing through wire to header

    I had one ford racing wire shorting, I couldn't tell till I grabbed the top of the distributor. The center wire got stuck on the end of the boot when the wires were put together. I shortened the wires and fixed the problem. Do you have 115* plugs or straight plug wire? You could try puting...
  9. Bosko5.0

    Car is missing above 2k rpm after hot.

    Checked all that. It's got me stumped. Took it too my cousin and he thinks it may have carbon build up in the egr or iac.
  10. Bosko5.0

    Car is missing above 2k rpm after hot.

    My brothers car is missing above 2k rpm after it has warmed up. We swapped the distributor,PCM,coil,ignition module, tps, iat sensor, maf, coolant temp sensor. I'm not sure what the duel pressure is? Nothing has fixed it. We're stumped. Any ideas?
  11. Bosko5.0

    Replacing Crank bearing, piston question?

    It worked out pretty good. The engine was on a stand.
  12. Bosko5.0

    Replacing Crank bearing, piston question?

    Do I have to remove the heads to replace the crank bearings or can I just unbolt the piston rods and push the pistons into the cylinders to get them out of the way. That way I don't have to mess with the valvetrain. The engine is from a daily driven 95 gt
  13. Bosko5.0

    best upgrades

    My top 5 upgrades: Heads Cam Intake Subframe connectors Rear lower control arms Of course I have only done the control arms on that list.:nonono:, I have 2 different sets of subframe connectors sitting in my room. I keep upgrading to beefier ones before they go on the car, im about to...
  14. Bosko5.0

    3.73 gear issue beating a dead horse but this is a lil different

    If he wants low rpm on the highway then go with 3.27.
  15. Bosko5.0

    After spring/shock install, banging sound from rear

    maybe the pinion snubber is hitting.... is it one knock or a bunch of knocks?
  16. Bosko5.0

    trans swap issues

    The computers settings for the trans shift points are set for either 2.73, or 3.27 gears. If you have a different gear size/ or more power it will shift alot sooner. A tune will fix that. you lose approx 10-20hp switching to auto. the torque converter is a heavy thing to spin.
  17. Bosko5.0

    SN95 with Cobra front brakes

    Take the pads off and check them I think they are glazed. Are they stock pads or aftermarket?
  18. Bosko5.0

    Longtube Headers?

    Ive got bbk longtubes with my auto, tight fit. the O2's need to be relocated to the out side.
  19. Bosko5.0

    Pip replacement/distributor ??????

    Sorry for taking so long to respond, haven't had any time working two jobs 7 days a week. Both mine and his were dying at idle at stop lights. Mine didn't throw a code but his did. I believe the seal is to keep the crank case gases from getting into the distributor. Well it turns out he...
  20. Bosko5.0

    Pip replacement/distributor ??????

    I helped replace my brothers pip sensor in his car a month ago. we had a hard time getting the dist shaft out because it had old oil or grease baked on it, we used pb blaster and brake cleaner to get it off. We greased the distributor shaft put it back in, spun easily. now a month later it's...
Top Bottom
Back
Forums
Menu