Search results

  1. M

    wanting to know what to do

    so u guys think thats whats best even tho the car is wreckd as in need new quarter front bump rear bump door and front right fender and oh yea a tranny
  2. M

    wanting to know what to do

    ok some guy want to trade me for my 5.0 coupe for his 4 cyl 90 hatch with new motor and nice body and ponys the thing is im thinking about it because my car has been wreckd and still shows it and now the tranny is messed up so what do u guys think would be best
  3. M

    clutch prob

    ok well anywaze im having a grinding noise in the bellhousing and its not the throwout bearing because i just replaced that and its not my tranny because i checkd to see if it was grinding metal in the gearbox and no shavings in there so i am wondering if its the clutch which prob is but i am...
  4. M

    clutch prob

    lol that was a pretty messed up message sorry about that was not thinking while i was typing i was in a hurry
  5. M

    clutch prob

    ok im taking my tranny and clutch out for the third time the first time just need a new clutch the second thought tob third trying to figure it out well its makeing a grinding noise utill u press the clutch in and then the noise slowly goes away checkd the bottom of the inside of the clutch and...
  6. M

    Just help,thats all i need.

    after driving it that long it probly reset itself and all the codes are back on track because the battery prob was dc
  7. M

    need deserprate help with clutch and throwout bearing

    i already took out the throwout bearing and the teeth on the clutch were not wore because its new just put it in about 600 miles ago and the throwout turns easily but the inside of the throwout moves back and forth but i think thats normal
  8. M

    need deserprate help with clutch and throwout bearing

    well i went to check the noise when it was running and all the noise came from the bellhousing
  9. M

    need deserprate help with clutch and throwout bearing

    ok i just pulled the throwout bearing and it looks fine but inside of the new and old moves back and forth of the throwout bearing is this normal? and the problem why i pulled the throwout bearing out is that the clutch or throwout bearing was making a grinding noise and i need help on figuring...
  10. M

    Doing my first Cam swap today.. 4 easy questions..

    i would send back the old gasket set and get a new one because i think there is a little difference in the gaskets and you can keep the old pickup just clean it and you will be ok and might as well have the machine shop do the valve seals to be on the safe side
  11. M

    No2 question how much will hold

    i was wondering how long the 302 block stock could handle a shot of 75 and can it stand up to constant use or just a few times
  12. M

    eletrical problems, no power throught car

    ill tell you what the exact prob is is the battery terminals they are full of acid clean that and if that does not work then look that the negative and positive wires and sometimes they are full of acid and you may have to replace those or cut them till the wires look better and not full of acid
  13. M

    Need help ASAP

    yes there is its in the back left side of the trunk just push it in and good to go
  14. M

    cruise control and horn

    for some reason the other day my cruise control and horn went out for no reason at the same time and i was wondering what caused this cant quite figure out why they both went out at the same time:shrug:
  15. M

    wheel camber

    i have a 1991 coupe stang and i was wondering how i could get my wheel camber fixed i have it all the way out thats how out of wack it is and i was wondering what would i need to replace to fix this prob ps the car has been wreckd and im trying to fix everything
  16. M

    People that rebuilt your 302

    yea it helps a good bit it will feel a whole lot better and the best way to go is to go ahead and bore it to 306 and you will notice a good little difference
  17. M

    trying to find a good setup for stock stang

    yea thats what i want to get that is the number one on my list so far would you know what times that would be for the 1/4 or rwhp would be at
  18. M

    trying to find a good setup for stock stang

    i was wo ndering what a good setup would be such as cams lower and upper intake and heads im trying to find a setup for my mustang right now all i have is intake and exaust as of right now please help thx
  19. M

    bent control arm?

    one thing that you can do i measure the other one at one certain spot and then measure the bent one i had to replace the a arm on my mustang because mine had gotten bent so i just replaced it they are not that hard to replace and you can do the camber but i would not recomend that you do it...
  20. M

    what would be best

    i was wondering what would be good on my 91 fox i was wondering weather i should get either heads such as twisted wedge trackheatkit or should i go with a supercharged system not sure what to do my engine is basically stock so please help or if anyother suggestions please reply thx:nice:
Top Bottom
Back
Forums
Menu