Search results

  1. 2

    '04 V-6 Automatic Tranny Question

    My thoughts exactly Thanks for the reply! That is exactly what I thought, but didn't have my hands on the car yet to get it up on a lift an really check it out. I couldn't see Ford designing a new tranny for use in one year of a Mustang either... All the salvage yards and even my local Ford...
  2. 2

    '04 V-6 Automatic Tranny Question

    I'm looking at a 2004 Mustang for my wife which had an automatic tranny in it. The Stang has the 3.8 V-6 in it. The problem I'm having is finding a replacement transmission for it, seeing someone hit something and busted out the bottom of the bellhousing exposing the torgue converter. Everyone...
  3. 2

    4cyl and 8cyl harness questions

    Need to jump in on this one... I just had a similar situation and just want to clarify before I go pulling the dash harness that I just started to install yesterday. I picked up a '93 LX 5.0 a couple weeks ago that had a small fire in the dash, due to someone's poor A-Pillar Gauge wiring job. I...
  4. 2

    93 Cobra Vaccum Tree ??

    Could someone with a 93 Cobra, or someone who knows for sure help me out here? I'm just finishing up putting back together the entire engine and wiring on a 93 Cobra that I traded for and have only one vaccum issue that I can't figure out. I'm pretty sure the vaccum size line plug on the MAP...
  5. 2

    93 Cobra Wheel Fitment?

    Shipping to Zip 65020 CW, Thanks! I thought said those wheels were on the car when you bought it? I'm really after the stock look, so the silver ones are what I'd really want unless I can get a pretty good deal on them. Let me know what you'd take total for them shipped to Camdenton, MO. 65020...
  6. 2

    93 Cobra Wheel Fitment?

    Thanks for info! I appreciate the information. Nobody seems to want to commit to giving me an answer on this, which I think is weird. I have one manufacturer of some wheel spacers checking with a "wheel engineer" somewhere to see what they come up with, but no one else will even reply for some...
  7. 2

    93 Cobra Wheel Fitment?

    Can someone lead me in the right direction here? I had recently picked up a '93 Cobra, yes an original one, but the previous owner had sold the OEM Cobra Wheels off the car. I'm wanting to bring it back to as close to original/new condition as possible, but am having issues with coming up with...
  8. 2

    PIP Circuit Fault - Need Help

    Update Just wanted to let you guys know that once we got the engine put back together with a new head gasket and the having the head machined, she fired right up and runs good. Thanks!!!!!!
  9. 2

    PIP Circuit Fault - Need Help

    Head Gasket was blown! Well guy's, Thanks! We tore into it tonight and in 2 1/2 hours had the head laying on the ground and inspected. The head gasket had blown out between the cylinders and it looks like a slightly warped head also. Taking it to the machine shop tomorrow and we'll see what...
  10. 2

    PIP Circuit Fault - Need Help

    What do you guy's think now? O.K. Both me and my son needed the experience in changing out a timing belt on these 2.3's, so we went ahead and put one on it while we were checking out the old belt and the timing. Guess what? It still doesn't start.:bang: Here's the bad news though and...
  11. 2

    PIP Circuit Fault - Need Help

    I'll start with that. Thanks Guy's! I had to leave town today for three days for a meeting out of state, but will double check the timing belt and then the compression on the rest of the cylinders to see what I get. Hopefully by this weekend. I'm hoping it's just the belt and it had jumped a...
  12. 2

    PIP Circuit Fault - Need Help

    Well, at this point I believe the '92 4 banger coupe I bought my son for his 1st car was sitting for lot longer than the previous owner told me and more than likely had not been running the week before like we were told also... We replaced the bad electric fuel pump, the Constant Control...
  13. 2

    Fuel Pump Relay Location?

    Getting closer O.K. We installed a new fuel pump this morning and that part is good to go now. I'm getting decent fuel pressure at the relief valve, so I think the fuel system is now working properly. Car will still not start at this point. It turns over fine but will not fire. I ran the...
  14. 2

    No Fuel Pump Relay on 4 Banger?

    2.3 4-cyl has different type of fuel pump relay... I just went several days looking for the fuel pump relay in my sons new car myself. It is our 1st 2.3 4-cyl in this family and someone in the 2.3 Tech Forum finally led me in the right direction. The CCRM (Constant Control Relay Module) is...
  15. 2

    Fuel Pump Relay Location?

    Only 6.75 volts coming out O.K. Here is what I've checked so far. I'm only getting 6.75 volts on the wire heading to the fuel pump, once it comes out of the relay in the CCRM. I also checked the codes and it came up with "secondary fuel pump circuit" being an issue. Is there any chance a...
  16. 2

    Fuel Pump Relay Location?

    Check engine light does come on... Thank You!! Yes, Once we replaced the ignition switch, the check engine light and the rest of the interior electrical wiring seems to be working. I'll go by the local Radio Shack tomorrow and see if they have a relay that will work. I had already drilled it...
  17. 2

    Fuel Pump Relay Location?

    Still Looking... I know it's under the seat on the 5.0 Mustangs, but I'm pretty sure I had read a while back that Ford located them somewhere else on the 2.3 for some reason. I also looked in that circuit board box on the passenger side strut tower and found a short relay that appears to be...
  18. 2

    Fuel Pump Relay Location?

    I know this is generally an obvious find, but my son just brought the first 2.3 4-cyl Mustang into the family. It's a 1992 notchback which the previous owner must have been having electrical problems with. We installed a new ignition switch and cured most the problems, seeing it was falling...
  19. 2

    Thought I was doing it right!

    New Clutch Fork? Well Guys, here's the latest. I've looked at the Heavy Duty Throwout Bearing that I installed thru the side of the transmission where the Clutch Fork goes thru. Obviously Right? lol It appears that the flexible clips on the backside of the original Factory Clutch Fork are...
  20. 2

    Thought I was doing it right!

    Can I adjust without removing? I can't say for sure right now. I thought I put it all back exactly the way it was when it came out. I had cleaned the pivot ball that the arm rides on and greased it prior to putting it all back together. It seemed to be functioning properly when I moved the arm...
Top Bottom
Back
Forums
Menu