Search results

world block bored to 4.125 complete forged scat rotating assmbely w/ flat tops and a 3.400 stroke should be around 10.1:1 Trick flow fast as cast heads with bowl blend trick flow R intake not the boxed one accufab 90mm TB with a custom ground cam from Camshaft innovations Duration at...

we are building a 347 and had a question about the intake. we are trying to put the TB directly on the intake instead of putting the elbow on because noone sells a 90mm TB for the 94-95 they are all 86-93 if anyone has any input on that that would be great but anyways is there an intake inlet...

ok guys i've got a 94 cobra with a 347 stroker i am getting fuel i am getting spark and i know i am getting compression and the darn thing won't even act like it wants to start any idea's i have tried: holding the pedal 1/4 of the way down and starting it ( nothing ), disconecting the MAF ( not...

I went to the track on saturday ran the best i ever had i went from a previous 13.6 to a 13.1 it was crazy but the bad thing was i was itching for 12's that i tacked it up to high and launched and SNAP!!!! Snaped the axle right in half hopefully all that is broken but we will see.

does anyone know where i can get a stock 99-04 axle cheap i snapped mine today and need somthing to drive on. thanks

i have an 03 gt that i just changed out the back brakes on and i was driving tonight and all of a sudden the brakes started squeaking and then a squeak started going when i was driving down the road ( squeak,squeak,squeak,squeak ) and then when i got home there was a weird smell in the back and...

i am looking at getting a 03 cobra and i was told that there are different variations of the 03 could anyone tell me what i need to look for to find these 1 2 or 3(?) variations and which one is the best to get? thanks

Vortech owners could you please let me know what you guys are making at the wheels, if you are intercooled or not, and what your mods are. I am looking in to a vortech set up but can't afford the intercooler just yet and just wanted to see what type of power i possibly could be making at the...

which one is better for nitrous beginners?

i know this isn't the power adder forum but wanted to hear everyones opinon. I've got an 03 gt with bolt ons and i want to put cams from comp and a nitrous kit from NX or DynoTune on the car. I have been hearing mixed things about going with a nozzle system or a plate system. Could anyone...

hey what do you guys think about this?

Finally getting the car dynoed on saturday hoping for around 270 but we will see what do you guys think? I've got - steeda CAI, FRPP 65mm TB, Dragon upper plenum, steeda UDP, Bassani X-pipe, flowmaster Cat Back, and a So Cal Tuning Custom Tune. Soooo...

i just got the faze air/fuel gauge and i don't understand the wiring its got one connection for just a power and a ground and then it got another connection with a green(?), Red(power?), and another black(ground?). Anyone know or have this gauge to let me know about?

i am trying to install a faze air/fuel gauge and it says that i need to put it on a wire that goes from the oxygen sensor to the computer. i have an extra sensor in an extra bung right now is there anyway i can use that if not could someone tell me which wire i need to use for this?

what is the best clutch for me to get. I am a weekend warrior, i run slicks when i run, and i am putting about 285-290 to the ground ( i hope ). but anyway i want a good affordable clutch for the money. What do you guys think:shrug:

Does anyone have access to carfax anymore i know that thread is done but i didn't know if anyone else had done it. thanks in advance. ray

i recently bought a chip from socal tuning and i am having an issue when i install the chip i cleaned all the connecters and cleaned them again but i am still getting the same result theft light flashes, fans stay on and odometer reads -------- . any idea from anybody thanks for the info

i recently bought a chip from socal tuning and i am having an issue when i install the chip i cleaned all the connecters and cleaned them again but i am still getting the same result theft light flashes, fans stay on and odometer reads -------- . any idea from anybody thanks for the info

i have a x-pipe i am trying to get rid of and there is no name on the x-pipe itself any idea's

i have a X-pipe thats got a bad cat don't know the manufacture of this x-pipe there is no name on the pipe the closest one that i can see is the bbk one it is 2 1/2 in also i have a stock drive shaft and some altezza tail lights what do you guys think i should ask for this stuff? ray