Search results

  1. J

    PISTON HELP

    i have the keith black s281 pistons and they have 2valve release and they r on one side of te piston should the go up towards the lifters r down towards the oil pan and will they work with the trick flow twisted wedge cylinder heads
  2. J

    weld draglight skinnies

    i had the same wheels on my coupe and i didnt have to use any spacer
  3. J

    some thing wrong

    i have the wires are all in the right spot im not really know what im talking about but on the keith black 2v realese pistons the valve realese r on one side of the pistons they should be pointing up and would they work with the twisted wedge heads
  4. J

    some thing wrong

    okay i have a 1990gt and everything is brand new it is a 306 with kieth black pistins,ecam,trickflow aluminum heads,trickflow 1.6 roller rockers,holley upper and lower intake,holley 70mm throttle body,bbk 70mm egr spacer,bbk cold air intake,24lb injectors,holley 190gph fuel pump,bbk adjustable...
  5. J

    fuel injection 2 carb

    well i have replaced everything on the fuel injection but it still will not run it pops and skips there r no vaccum leaks and the valves r not to tight and i just want to sell it and put a carb on it and say the hell with it and i dont have to worry about emmisions
  6. J

    fuel injection 2 carb

    i have a 1990 gt and im thinking about going to a carb what all would i have to change ingnition can i use the same one r do i need 2 change thanx
  7. J

    egr spacer

    this is my first mustang and really dont know alot about cars but do know some stuff but on the egr spacer the vaccum lines are plugged off but its not running it is skipping and poping and will not idle but i think it is a fuel problem but please help with the vaccum lines
  8. J

    skipping and wont idle

    ive tried that and it still does the same thing it is like its starving for gas
  9. J

    skipping and wont idle

    but im going to put injectors mass air and regulator and pump do u think i should
  10. J

    skipping and wont idle

    ye could be it did richened up
  11. J

    skipping and wont idle

    i think it is a fuel problem cause i took the vaccum line off the fuel pressure regulator and it started to run alittle better but still skip but not as bad
  12. J

    skipping and wont idle

    i have checked
  13. J

    skipping and wont idle

    i just recently built a motor its a 306 with keithh black pistons e cam and trickflow heads and holley upper and lower intake 70mm throttle body but before i had stock heads on it and it ran fine but when i put the trick flow heads on now it wont idle and skips and pops i have replaced just...