weld draglight skinnies

[icemetalstang]

I am running weld drag light 3.5 inch with a 1.75 back space. My question is do you have to run a spacer for the front wheels to clear the calipers and if i do what size? Thanks

 

[jake1990gt]

i had the same wheels on my coupe and i didnt have to use any spacer

 

[PUNISHER RACING]

I had to cut the clips off the pads they rubbed

 

[NKau]

You shouldn't have trouble clearing stock fox calipers. Can't comment on the sn-95 calipers, but at worst you'll have to run a small spacer, or just do a little caliper bracket grinding.