Search results

So I recently bought a 99 cobra that has a 04 terminator swapped engine. The car recently began missing. Replaced the battery because it was bad, alternator checks out okay. I bought a fuel filter, plugs and coil packs, the FRPS seems to be working okay. My IC pump also was plugged or had...

This time with a 90lx hatch I got a screaming deal on a 90lx. $2700 got me the car, a 04 Cobra IRS and: All New Parts ready to be installed. Aluminum drive shaft Strut brace cobra clutch kit bbk O/R pipe Mgnaflow cat back Door stripping Clear tail lights BBK CAI Black Magic Fan kit And a...

I think I may have found the right car for me.... Took some pics for you guys to help me out. Originally a I6, have V8 suspension on it...Has an 8.8 in the rear. I found out he is also including a four piston disk front with it as well. I will be putting my 88 5.0 and t5 in it. Any...

So I bought that green 88 bomber you see in my garage for a decent price back in Feb. It had frame horn damage that I felt was repairable, plus it ran great, shifted great, and drove really well. The oil pump went out about 2 months after I bought it,so I decided to freashen up the engine...

So here is my delema....I have an 88 GT that I bought that had a bit of damage, but discovered it would cost more to repair it vs. buy a roller. I want to buy this indy pace car, put my front suspension on it, and swap everything over. I am thinking of going carb, running a performer rpm and a...

YouTube - Ford SHELBY vs CAMARO vs JEEP vs VAZ 2107 vs HELICOPTER - My cars (showreel)...

So I am looking at either getting a full 97 explorer engine, but If my bottom end is still ok, I am going to just get the heads, intake, and new valve train to go back in. I have these valve springs left over from my 383 stroker LT1. WHat do you guys think? is it possible? they are more than...

So I found one at my local JY, but could not get the bolts out. They are 12 point bolts, and I came close to striping them....Any suggestions??

I think I went through just about every e fan thread, and I have a new question. I used a dual fan out of the contour, bought a hayden therm switch and a 30 amp breaker. I had a bit of trouble with the wiring mock up, but thats cuz I was being dumb and wired the fans to the power, bypassing...

So I was driving home in the rain for the 1st time since I bought my 88gt. It began to stumble intermitently. I do not have fender liners and I also have a bbk cold air kit, thats was a bit wet when I got home. I also noticed the voltage gauge would drop to about 8, until it reved over...

Got a set of LX tail lights for free! Guy I work with(different company) had them laying around. I told him I would keep an eye out for parts! Anyone need a set of GT tail lights???:D:p

If your into Cars, Guns, and Baseball....We have a good league for you. FANTASY BASEBALL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - Calguns.net Calguns.net is a great website full of awesome people who are commited to keeping all of our freedoms. league id-431909 password-MOssberg500...

I know we have a lot of threads on this but I could not find what I was looking for. I found a donor 95, and they will take 125 for everything I need on the swap. I am going to run up and get the parts tomorrow. What tools will I need? Still learning the Ford side of mechanics. Any info...

I did my first Mustang upgrade yesterday. I bought a summit racing H pipe and the fit and finish were good(except the bolts were too small) but can someone tell me how to get the ford flanges to align properly? Last week, I tried to make my own h pipe(too many bends and no pipe bender) and...

I would guess I pulled about 20-25 LBS. out of the rear of the car yesterday. Cut out most of the sound insulation in the rear area around the hatch, cut the insulation off of the carpet, and scraped the tar stuff out all the way up to the seats. Those two sound mats between the carpet and the...

I need new tires, but I would also like to go with a 17" rim instead of the 15" cragars I have. I want to get some stock 97-07 wheels, but looking to do it on the cheap from craiglist. Has anyone used these...

I used the search and helped a bit..... My car has a lot of wheel hop under a medium to hard launch. It has newerish KYB shocks and Ebaich lowering springs. I know F-bodys have this problem when the car gets lowered and the correction is Control Arm relocation Brackets, (do they make...

Hey guys, I did a search with no results. What is the stock diameter for an 88 GT? I would rather drive to the store when I yank out the cats tomorrow, than walk!

I get this whistling sound from about 1/3-2/3 throttle. It has a TB spacer, and the guy I bought it from stated that was the source. Doesnt effect anything, just sounds wierd.

Hey new to the forums and fords for that matter. I have always been a Trans Am guy, but have loved the fox body almost as long and I am getting a 88 GT 5spd tomorrow for 1700$. My buddy is a big ford guy so he gave me a few pointers when I looked at the car. I will post pics when I get it...