Search results

First off to get everyone caught up to the present day. This was the first car I bought when I was 16. 1989 lx Car came with a bone stock 302 and was all White. Soon after buying it I purchased another. 1995 gt from my brother that had a few things done. While driving this car I would start...

Working on re-wiring my 89 mustang with an ez wire 21 kit.. (Not Ez btw) I'm working on the coil part. As per my haynes manual the positive wire for the coil comes from the ignition switch. Now is this wire always live? Cause according to my old wiring harness it comes from fuse #18 runs up to...

So I bought my 89 mustang when i was 16, 16 years ago. The dash harness had been hacked into previously b4 and I'm sure i did my fair share adding things here and there. Well the wire Is old and brittle, I have aftermarket gauges everywhere, Nitrous bottle heaters, just stuff everywhere. So I...

I read on another forum of someone using http://www.uprproducts.com/mustang-abs-plastic-boost-master-tube.html#customer-reviews on an N/A motor kinda like the one anderson has.. Has anyone else done this? And confirm that it will work?

Tried doing a search for this and it seems most people do this and disc brakes.. Can I do this and keep my drums? was gonna go with this kit http://shop.holcombmotorsports.com/MOSER-ENGINEERING-79-93-35-SPLINE-4-LUG-AXLE-KIT-88-REAR-END-MSR8835-4.htm but i read people say blah blah my c-clip...

Its a stock bottom 351w afr 205. comp cams xfi 248hr-13. BBK long tubes and h-pipe. Tried to take it our yesterday and my csi electric waterpump went out.. :(

My dads sticking my old 302 into 1969.. efi with the explorer intake.. Problem is with that intake and the valve covers i had to run a 1" spacer to clear them.. Will he have a clearance issue? Thanks

Sorry i tried to search this but wasnt sure how to word it. So a buddy helped me out tearing my 351w down awhile back so i didn't get to see how the connecting rod caps go on.. Do the notches for the bearing line up like or like . If you cant see the difference just need to know if the bearing...

So i bought a 351w out of a 1997 e-250. Planning on rebuilding it with http://www.summitracing.com/parts/fem-mhp175-023/overview/ and possibly using http://www.summitracing.com/parts/tfs-5261t561-c03/overview/ for the heads. either the 56 or 66 http://www.summitracing.com/parts/tfs-51403005 for...

Bought a set of kooks headers ages ago for a project i was building.. Problem is i had so many different ideas 302 versions and 351 i cant remember what these headers were for.. Is there a way to tell between the two? Measurements and such?

So i would like to start loggin my afr but dont own a laptop nor do i want to buy one. I have 2 gaming systems already built and dont want to purchase a laptop just to read my data. So Basically looking for a wideband kit I can kinda keep an eye on while at the track with a smart phone and look...

So I'm trying to read up all i can about how to read my plugs for my nitrous tune.. Iv'e googled this and came up with nothing, so here goes. When guys do a nitrous run and shut the car down at the end of the pass to do a plug check. Do they replace all the plugs every time for a new run, or...

3 Passes and only about 30 miles.. Tires to big for a fox with ground affects. Atleats for my liking. Valdosta GA. 15 minutes from SGMP

Wasnt sure where to put this, but isnt the c&l mass air for a cobra with 24lb that same sample tube and everything for a non cobra with 19lb? The computer changes it to 24's for cobras dont it?

First ever port and polish job on a set of gt40.. If you have never done this lol dont.. I have about 60+ hours in the heads and explorer intakes.. Hoping it helps alot. Should have probably took those hours and stayed at work and bought some afr's lol

So i took my car to the track last night after 12 years of it not running. Ran a 13.302 @ 100.04 60'.... 1.762 330... 5.353 1/8.. 8.392 1000... 11.046 So i have the explorer engine with the trick flow stage 1, explorer throttle body, upper and lower intake. Electric fan and water pump. Manual...