Search results

Did you ever ship these out? Let me know thanks!

Sent you a pm!! thanks!

kenaimone do these guys have a website and how do I order these, if they aren't to much I'd give them a try, I'm in NC.

Here are some pics, they are of the flywheel teeth. The starter is brand new and also the backplate is installed. Hope this helps, thanks guys!

The starter will sit in its spot without needing the bolts to pull it in. The flywheel teeth are worn pretty good on the starter side, but just past that the teeth look flawless. Do you think after a couple of starts the gears will clear themselves up? Thanks for all the help so far!

Rustbucket, The backing plate is installed between the block and the bellhousing. The flywheel teeth are slightly chewed up on the motor side of the flywheel not on the transmission side. It almost looks as if the starter gear is hitting the flywheel as it comes out and not meshing properly.

well, I pulled the starter out and had it checked out. Turns out it sounded like a bunch of marbles in a tin can so I got a new one with LLW. Put the new one in and guess what, sound is still there, not as bad but still there. I checked the flywheel, no missing teeth but the motor side looks...

it looks to be flush. I noticed there are two diffrent starters, could it be possible I have the wrong one and if so, what determines which starter to use, is it the bell housing or flywheel?

Ok, I had a T5 swap done on my 87 2.3. Well all went well except now when I start the car it sounds like metal grinding. So, I thought maybe the starter was shot and put a diffrent one in it and still got the same sound when starting. Does anyone have any ideas on what else to look for or try...

Yeah I got lucky, it should have had 3 but for some reason that one had 4 sealed inside. The other one only had 3 in it.

Ok, I hope this is useful for someone out there. I just repaired both of my fried rear motors in my 87 Vert and took some pics while doing it. Here you go. Tools and parts needed 1. 8mm socket 2. phillips screw driver 3. small flat tip for getting gear out and broken parts 4. Part...

DSC00360

DSC00357

DSC00358

DSC00359

DSC00353

DSC00355

DSC00356

DSC00349

DSC00351