Search results

More than likely not an ignition issue. Sounds like there is an issue with the 12v source to the fuse box. At the top of the fusebox (closest to the firewall) is where the source is. A cable from the battery bolts into the fuse box. Itll be under a red cap. Check that connection and make sure...

So I just installed my NX plate kit for my 08 GT. Since installing it, I hear a whistle under load at slight throttle. It goes away when im off the throttle and when I have anymore then, say, 1/4 throttle. Ive always been told that whistles are vacuum leaks, but ive quadrouple.checked all the...

I was thinking about buying a nitrous kit for my 2008 Mustang. I was going to go with NX 3V plate kit: Nitrous Express » Next Generation Nitrous Oxide Systems » 4.6L 3 VALVE PLATE SYSTEM (50-150HP) 200HP JETTING AVAILABLE 10LB BOTTLE For what I am seeing, there is no heater and no purge with...

I had both the Nittos and the Mickeys on my fox. Mickeys hooked MUCH better. Nittos could take the rain no problem, and I spun out on the highway in a mild rain with the mickeys going maybe 45mph. Do not get the mickeys if you.plan to DD the car.

My 08 has always felt that way. When I added my brenspeed tune, it just made it more noticable.

Someone was recently telling me.to.just go out and get an anti roll bar on the rear. That itll help out the most. Any thoughts?

Dont go back to SD, it will not like that cam. Sounds to me that both A9Ls are shot. Get a known good one and see if it helps your problem.

Whyd you end up buying a new engine over a blown headgasket? Wouldve been much cheaper and easier to just replace the head gasket. Howd you determine its an F150 engine? If its a HO engine, it doesnt really matter what it is from. Did you just buy a MAF adaptor or an entire MAF harness...

Rods and mains? What for? Unless you going for a full out stroker kit (wayyyy more than $1000 after all.is said and done) your not really doing anything at all. You really need to decide your ultimate goal for the car. Is there a reason you want 100hp, specifically? You drag racing the car and...

Exactly what I was looking for. Strange it is. Thank you!

How are the Strange's? I wanna get both struts and shocks, that will be adjustable, so I can set it for the track and then for normal driving. I will be using these with Drag springs. Am I going to need camber/caster plates to put either of these on? I'm not trying to be cheap, but I'm not...

Hello everyone. I have been a member here since 2004 it appears, but never really posted. I guess I mustve forgotten about this site. Sorry :notnice:. Anyways I just realize I posted my first post in another section and figured I should come over here and say HI, finally. I currently...

Thanks for the reply! lol thought I might have posted in the wrong section for a second. I already have 4.10 gears. I got a set of Mickey Thompson ET streets mounted on a seperate set of wheels for when I go to the track. I planned on getting the UPR upper and lower control arm kit, then I...

Im looking for a sort of "street/strip /drag" suspension. I don't want anything too crazy. I was already going to go with upr control arms and drag springs. Is there a good shock/struts made that are good for drag racing? Im used to fox bodies which appears has a slightly different recipe. Any...