Search results

Last week lost the fuel pump while driving and found it to be a blown fuse. Owners manual says "fuel pump" with nothing else on that fuse. That day it was hot and I was running max A/C. While I was looking for he issue, I noticed the radiator fan was not running. Once I replaced the fuse it...

Anybody know where to get these. I just bought the smoked headlights from AM with clear sidemarkers and now the orange bulb looks stupid. I've seen clear or blueish looking bulbs on SRT4's but can't find them for the stang. Any suggestions would be appreciated, well except the ones where...

I swapped from my GT straight axle to an 03 cobra IRS. I have a vibration at 40 mph now. I was going to buy an aluminum driveshaft for a GT but isn't there a difference between GT driveshafts and Cobra DS's besides length? I've heard something about the cobra ds has something built in to dampen...

Just thought I'd put this out there for those who are thinking about going with a bigger/taller tire. 255/45's are Nexen s3000 $487 mounted and balanced. 275/35's were BFG KDW 2 were $700 something mounted and balanced. BFG's were awesome tires, good from a dig, good at high speed cornering...

Looking for recommendations. Any help is appreciated.:nice: Thanks, STeve

I'm looking into buying an '03 Cobra SB and slapping on my P&P heads and blower cams. What are the issues that I will be running into? IS there anything or will it just bolt up to the 2V's heads and use the same clutch, etc. Thanks all.

I have '03GT with the Romeo heads. I got a good deal on P&P Windsor heads with upgraded valves/springs and Windsor valve covers. I also have used VT blower cams. Lots of questions but let's start with any helpful info as to what I will need for the swap. Do I need cam gears or can I reuse...

Car has 73K miles and about 10K with the KB. It's giving me wierd hesitation problems during low RPM's when you give it some pedal. Goes away after 2,500 RPMs or if you back of the gas and ease into it until 2,500 RPMs. Wideband shows a lean condition. I figured I would start with fuel...

5speed-70K miles Started driving this AM with no problems, about 3 miles down the road, I'm cruising down the off ramp and something feels off. Like a slight vibration/ticking noise and it was speed dependent, slower I go the slower the sound. Drove around for lunch and it's worse. It almost...

P1000, P0153, P0602, P0605, P1211, P1690. I just put on the KB and no codes for 2 weeks. Then had the tuner fix a hanging idle and now all these codes are going on. I have a Wideband in the rear passenger side, i think, but I've had the rears shut off with the predator for years. If you need...

I bought a used 1.7L KB for my '03GT and want to get a mail order tune to drive it to the dyno, about 30 mintues away. Anybody have any good experience with a mail order tune for a Predator, because I already have a predator. I know MPH and Brenspeed and some others but they have Xcal. Or...

Tires: BFG KDW's 275's Rims: Konig Beyond - 18"x8.5 Let me know what you think. I wanted a "mustang style" rim with a little flash but nothing too bling or chrome or overused. Also I stuck with 18"x8.5 at all 4 corners so I could rotate tires especially after I looked at prices of tires for...

Anyone have some good work done by a shop around Tampa? I heard about someone in Sarasota but the number doesn't work.

I'm going to give this install a shot, with the help of my brother in law who is a mechanic, but hasn't done one on a modular yet. Can you guys put together a list everything I will need? Cam gear, antifreeze, bolts, gaskets, beer? :SNSign: Also, my brother in law is getting some instruction...

Here's the description that I got with the used heads I bought. "ITs cool...they have some of the short runner taken out, and the ports are blended to the valve seats. They have brand new Crower SS valves +1mm intake and exhaust valves on them with a competition valve job and Comp springs...

I bought a set of used SLP UDP's, look just like Steeda's. No instructions and no bolts. I know the Steeda's come with a starter bolt to push one of the pulley's on then you switch it to the stock bolt, something like that. Can I just put the pulley on with the stock bolt. I also know to use...

Gonna rip some stuff apart tomorrow cause I can't take it anymore. I've sat in the back seat and in the trunk and I swear it sounds like it's coming from somewhere between the speaker and/or the C pillar plastic cover. I took out trunk interior, messed with the shocks, LCA's and exhaust...

I was going to do a write up, but this is more of a "WTF am I doing wrong" write up. So I used blue LED's first, then tried blue bulbs and neither were bright enough. I tried to take a pic but it's not bright enough to show up on my crappy camera. So here's what I did and tell me what I'm...

Looking to tune the stang. Preferrably a Predator tuner, since I'm presently using that. Any recommendations would be appreciated, except for race related. Had/have problems with them. Thanks :nice:

OK The sound department is not my thing. My girlfriends Accord sounds much clearer and better than the stang. I know the Ohms are different on the Mach system and I could put in a different head unit with a harness from Crutchfield. My question is can I get good sound with just replacing the...