Search results

So, im going to get the Quarterhorse to tune my 5.0 with a thumper and tmoss combo and an AMS cam and i know a wideband will be necessary but im not sure about which is a good one to go with. I have heard Innovate is a good company and found one of their widebands here that seems alright for...

i have an 89 Notch that I have done some mods, Thumper and Tmoss intake and heads with an AMS cam and 2800 stall converter and am strongly considering going with the Moates Quarterhorse to get my tune set-up. My main question is reliability of the Quarterhorse, anyone have issues of the device...

So over the winter i've been repainting my interior since it was 7 shades of gray. I decided to go with a black and white scheme and am pretty much finished up, minus a few little peices (seats and 1 or 2 trim peices). But figured id post up some pics. So here they are.

I'm going to be doing my cam and heads swap here fairly soon and have a questions about measuring for the pushrods i would need. I'll be running some Thumper E7's with an AMS N-21 cam with 1.6rr's and my question is if i decide to degree the cam would this effect the pushrod length. I have a...

Ok i'm looking at going with a set of thumper ported E7's with my Tmoss intake. My question is regarding the cam i know Thumper recommends the E303 cam for AOD Stangs. I'm wondering what other options i would have here to get some more power out of this set up. I have heard many good things...

I'm trying to figure out what i can and can't do with my 91 Notch. I want it to be a good all around car that will run some decent 1/4 times and handle good on the back roads near me. The question i have is what are the limitation of keeping the my notch a 4 lug car, to make it handle better...

.....Not another Battery Relocation Question? Yeah it is, my question is which Taylor Kit should i purchase? I was on SummitRacing and they have multiple Taylor Kits and would like to know which i should get (part numbers please). I am about to complete a overhaul of my 91 Notch and this is...

I just sent my '91 Notch into the shop to get sub frames installed as well as some underbody rust taken care of. While doing this i removed my carpet and seats, which were pretty trashed from the previous owner. I want to replace the interior with a Black and White interior as opposed to the...

Where would i find a 3g Alt?? am looking to go with the rear mount battery option and also have underdrive pullies, so im trying to eliminate future problems. Is this alternator found at junk yards or what? I hear alot of people tlaking about it and havent been able to find where to pick one...

I have an 89 notch that ive been working on over the past couple years, due to being in school i havent been able to work on it that much, but i need to replace the floor pan on the drivers side. While doing this i am considering also getting sub frame connectors and new torque boxes done at...

I have an 89 coupe that i blew the motor on from using nitrous and am putting it back together slowly. I got a fresh motor with 1.7 rr and a slight port job done to the heads and the intake is ported as well(both stock). I have 24lb injectors and a 75mm MAF to match it, i plan on getting some...

I currently have a 89 notch with an AOD in it and would like to keep it Auto for racing it. Would there be any advantages to switch to a C4 with a manual valve body or should i just get a manual valve body for my AOD i curently have? And just for reference i have ported intake, 1.6 rr, 3.73...

my buddy busted his driveshaft last night on a tree stump and was wondering if anyone knew what driveshafts fit my buddies truck its an early 90's F150 XLT with a 351 if you have any details please letme know thanks ryan

im trying to reconnect the shift linkage and the TV cable and cannot figure this out. The chitlins manual doesnt offer much and it just doesnt seem like the peices want to fit together. Any help would be appreciated.

Can i use braided stainless steel lines for my AOD tranny for the cooling system to the radiator?? I ask this because i dont have the tools to bend new lines and i also havent done this before. thanks

I have an 89 notch that i blew the motor on and installed a rebuilt motor in february of 2004 (goin back a bit) and havent had much time or money to work on the car due to school. Now im starting to get back to work on it. The motor i installed seems to be off center, like it is not directly...

I was in one of the other forums talkin about how to get past emissions w/o cats and Ruzman brought up this idea "Purchase a Diablosport Tuner. You can turn your O2 sensors off through your OBD-II and pass the sniffer like that. I don't have an O/R pipe, but I have a Bassani w/ Bassani cats...

wondering if anyone has pics of their AOD trans installed so i could see how the shift linkage and TV cable are all connected? Im putting my car back together and its been awhile and the diagrams in the chiltons are near microscopic. thank ryan

I have an 89 Notch that i have been VERY slowly putting together since i am at school. I need new transmission coolant lines for my automatic trany. I'm not sure where to get these at, ive tried my local speed shops looking for stainless steal braided lines and they all tell me they cant do...

Im gonna have my mustang up and running again in a short while and want to have a shop look over it for me and give it a nice tune up does any one have any suggestions about who to take it to in the South eastern PA region? thanks Ryan