Search results

  1. M

    Brake issues: Please help

    yea lindenhurst long island, check the voltage coming from where?
  2. M

    Brake issues: Please help

    cross drilled slotted rotors can't be turned, but the performance rotors stay so much cooler than stock that as long as u keep up wit the pads u'll never need to replace or turn them. I'm looking to sell the car come spring so 800 bux on cobra brake's doesn't seem good. I know that the...
  3. M

    Brake issues: Please help

    ne1?
  4. M

    Brake issues: Please help

    Ok i've spent about an hour searching trying to find and answer 94 vert wit 120k on it AODE to t-5 swap. Since i got it i have bought Cross drilled slotted rotors and new pads all the way around. The drv rear pad was at the metal and i believe it was no sitting properly when installed because...
  5. M

    wOULD AIR IN THE BRAKE SYSTEM CAUSE THIS?

    well now i'm having brake issues too mine make the car shake but nothing that seems out of line. I think the dial indictor would work best mainly because u can spin the rotor to see high and low spots which would show warping. The reason i would be against the calipers is because thats...
  6. M

    Underdrive Pullies + Alternator Problems = questions

    WEll mine has already gone last month, got a new duralast in there now 65 bux at autozone
  7. M

    Underdrive Pullies + Alternator Problems = questions

    so u guys would consider this to be normal behavior for UDP's? with the exception that the volts are really dropping bad now, when i have the moeny a new alternator will be in. I can understand a small drop in volts but not so far my stereo shuts off If i check the volts coming out the...
  8. M

    What suspension mods are fairly easy to do with basic hand tools?

    Yes, i've had to use a breaker bar wit a pipe on it to get the extra leverage plenty of times. And while i've done all the suspension mods on my chevys10 mostly alone, i would highly recommend u have a buddy with you, god forbid the car rocked off the jack, and always have a spare set of jacks...
  9. M

    Underdrive Pullies + Alternator Problems = questions

    Ok since i've got the car the headlights are slightly dim at idle, but when i hit the gas all my instruments/headlights brighten up. Now this problem has been getting worse and now at nite i pull up to a light and the volts drop so bad my stereo turns off. (and no i don't have a system its...
  10. M

    o/d off light coming on and off

    ok coming together now, there is a loose cable/ and wire hanging around my shifter area that i didn't kno what it went too. when i took the boot off i found em must be the O/D cable that is loosely bouncin around. This is what sucks about buying used.
  11. M

    o/d off light coming on and off

    jus as the title says, my o/d off green light pops up occasionaly when i get in my car sometimes, turn the car off and bak on its off. is this normal oh and i have a 5spd and this isn't makin sense
  12. M

    How hard to change outbearing, T5

    in order to change the rear output bearing the whole tranny needs to be removed, the seal does not. its a pressed fit bearing in there. Only kno because some ******* put a earlier t5 in mine and didn't get a driveshaft spacer or make a decent mount so the d/s wore it out. lookin at 450-600 or...
  13. M

    Twin Turbo Build Progress -pics-

    my point was instead of putting heads and an intake on why not jus boost the motor to 8psi to make up for all that. Instead of having a performance motor produce 350hp on 5 psi, make a stock motor put out 350 on 8 or 10psi cheap hp
  14. M

    Twin Turbo Build Progress -pics-

    i gotta ask, i was debating buying a low mileage gt and doing a twin turbo jus as this one. I wonder what 5 psi would do to a stock motor? And would it be more cost effective instead of dropping 1500 hundered in the heads and intake, why not just turn up the boost? Because it seems the power...
  15. M

    Needed stock intake for a 95

    Intake choices FOr our 94-95 correct me if i'm wrong choices are: BBK Mac ebay intakes WOuld the ebay intakes perform just as well as any other? My buddy has a 95 and at times it sounds like he is running a turbo, and he told me that it started making a whine after he put his intake...
  16. M

    Convertible motor is going, where to buy new?

    pokageek how old is the motor?
  17. M

    Convertible motor is going, where to buy new?

    Jus like the title says, vert motor has to be helped in order for the top to come down, but has no problem lifting the top up and on. few questions Is it the motor? Most likely so how much is a new one, or should i pull from the junkyard? And one other question how much would it cost to...
  18. M

    differences in sn95 t-5, & f body t5

    well i'm getting my driveshaft spacer tuesday 5/8" i believe
  19. M

    Why is my mileage so low?

    My smog pump is clamped shut, what is the difference b/t that and an egr
  20. M

    differences in sn95 t-5, & f body t5

    yea even though i'm 5 10, and i always like the have my seat close to the front and it while its barely noticeable i know 5th gear should be a lot closer. Would their be any gains wit the older t5? (i looking for atleast one positive out of this mess)
Top Bottom
Back
Forums
Menu