- Jul 11, 2004
- 3
- 0
- 0
I know this has been addressed a lot, I just want to confirm the following before I begin. I have a Mach 460 6-CD unit in an 03 Cobra:
1. The rear and door woofers are powered by amps in the rear deck.
2. The tweets are powered by amps in the HU.
3. The Metra 70-5519 adapter WILL allow me to go plug & play as long as I send power to the tweets from the HU: http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=265-790
This is all true, correct?
I know there was a stealth change in wiring between 03 and 04, and most of the folks here have posted using an 01 as reference, so I just want to be sure. I don't really want to yank all the wires out and redo the whole thing.
Thanks in advance.
1. The rear and door woofers are powered by amps in the rear deck.
2. The tweets are powered by amps in the HU.
3. The Metra 70-5519 adapter WILL allow me to go plug & play as long as I send power to the tweets from the HU: http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=265-790
This is all true, correct?
I know there was a stealth change in wiring between 03 and 04, and most of the folks here have posted using an 01 as reference, so I just want to be sure. I don't really want to yank all the wires out and redo the whole thing.
Thanks in advance.