89 5.0 030 over flat tops with dish,351w pro comp 3037 heads.remachined with twin springs.Edelbrock performer rpm carb. Intake .600 carb.e303 cam.bbk headers.hei distributor conversion.3.08 with t5. Any guesses on horsepower or 1/4 time ?
89 5.0 030 over flat tops with dish,351w pro comp 3037 heads.remachined with twin springs.Edelbrock performer rpm carb. Intake .600 carb.e303 cam.bbk headers.hei distributor conversion.3.08 with t5. Any guesses on horsepower or 1/4 time ?
Yes I bought it from someone.the heads had to be fixed.flash burned on head gasket.milled them 010 and replaced all valve train.pistons are 030 .seen it myself
Yes I bought it from someone.the heads had to be fixed.flash burned on head gasket.milled them 010 and replaced all valve train.pistons are 030 .seen it myself
About 275 rwhp and depending on tires,suspension,your driving ability,and the track could run in the mid to low 13's. You need more gear ratio like a 3.73 or 4.10 if you're just concerned about track times.
Thanks.I am considering 4.10s and maybe a 6spd conversion for daily driving I only work a few miles away..at ford .also I have draglites all the way around .15x8 on rear runners up front.my rear spacing is only 3.5 deep.I have seen the 5.5 offset.will it fit with 10.5 slicks without tubs ?