Alignment question

[BDAWK2002]

I have Steeda sport springs and Steeda c/c plate's(the 3 bolt ones).I'm going to bring my car in for an alignment tomorrow and was wondering if I should tell the place any special instructions.The car is lowered like an 1 1/2.Does it still get aligned like a stock mustang or does it need special attention?

 

[94-302-vert]

maximum motorsports has some good alignment info on thier page. I plan to uise that if i ever get mine profesionally aligned.

 

[bimmertech]

I have Steeda sport springs and Steeda c/c plate's(the 3 bolt ones).I'm going to bring my car in for an alignment tomorrow and was wondering if I should tell the place any special instructions.The car is lowered like an 1 1/2.Does it still get aligned like a stock mustang or does it need special attention?

it depends on what you want. when i do my car i always go max caster and about 1.3 neg camber. the toe should be set to stock specs, make sure you get the print out and look for anything out of the ordinary. if they try and say that they can't get it in specs cuz it's lowered just say thanks and take it someplace else.