Badlilstang
Founding Member
If you pull the drive shaft out and run it through the gears your gonna lose some tranny fluid out the back... id wiggle the pinion around and see if it moves or feels loose.
Valve noise... do you have roller rockers on this car? They tend to be louder then the stocks. Are you getting a good 3/4 turn of compression on the lifters? Are they all ticking or just some? Have you tried to pop the valve covers off and see if you can get them any tighter?
Valve noise... do you have roller rockers on this car? They tend to be louder then the stocks. Are you getting a good 3/4 turn of compression on the lifters? Are they all ticking or just some? Have you tried to pop the valve covers off and see if you can get them any tighter?