- Feb 21, 2006
- 572
- 1
- 19
Okay - bought a new Holley 600 put it on - took for test drive and car died. Could not get restarted right away - let it sit and and it started uo again. Did not seem like it was getting gas. Would want to fire from the accelerator jets but was not getting any gas from main jet.
Changed fuel lines (had original), fuel pump, sending unit, put filter at tank and carb. Same problem. Ran for awhile - little lean and the suddenly quit - I am getting gas in the lines - pulled line off carbed and checked. When turing over the car could not see any gas coming from the from main jets. Pulled float bowl off and not sprayed with carb cleaner - looked fine. I know it is not vapor locking - I have spacer on intake.
What should I try next? Appreciate any help..
Changed fuel lines (had original), fuel pump, sending unit, put filter at tank and carb. Same problem. Ran for awhile - little lean and the suddenly quit - I am getting gas in the lines - pulled line off carbed and checked. When turing over the car could not see any gas coming from the from main jets. Pulled float bowl off and not sprayed with carb cleaner - looked fine. I know it is not vapor locking - I have spacer on intake.
What should I try next? Appreciate any help..