Condensation in headlight lens

[351 82GT]

Is there a way to remove condensation from behind the headlight lens in the 87-93 mustangs? My driver side lens has water behind the lens, which effects how well it works. There's a small hole on top where water seeps in.
Is the lens a sealed unit or is there a way to remove them and get the condensation out.
I just need to know if I need to buy new headlights or not.

 

[feifong]

you will need new headlights its a supposed to be nice and sealed from where the bulb is. I drilled a small hole on the bottom to let it seep out if it ever got full.

 

[bullitstang1313]

Although drilling a hole allows it to seep out over time, it also allows it in much easier since it is now less sealed. You're best bet is to replace them.

 

[$uperstang]

All you have to do is: 1) Remove the headlight 2) Blow dry the water out 3) Seal the entire perimter of the hedlight with good silicone (clear) 4) Re-install, GOOD AS NEW!!!

This is what I did 5 years ago and never had another problem.

 

[351 82GT]

Damn!

 

[$uperstang]

Damn!

Ya bought a new one didn't ya? Well if you did at least you know what to do when if it happens again!