Engine Swap Issues

Discussion in 'SN95 4.6L Mustang Tech' started by Brooks Dawson, Aug 22, 2014.

  1. Brooks Dawson

    Brooks Dawson New Member

    Joined:
    Aug 22, 2014
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    I have a 2003 GT i want to put the 347 out of my 84' into. i believe i will run into issues with the brake booster. I already know ill need a new K member and ive located one from AFCO. I need to know if all i need to do is re-route the vacuum from the hub to the intake on the 347? Any ideas folks? Thanks
     
    #1
  2. TeamCaffeineGT

    Joined:
    Mar 16, 2009
    Messages:
    152
    Likes Received:
    7
    Trophy Points:
    18
    Location:
    Springfield, MO
    Brooks,
    The vaccum for your brake booster can be run off of the intake. The 2003 brake booster is also a hydroboost until and will need the hydraulic lines plumbed to the boost unit from the power steering pump. You might want to take a look into how the 5.0 in the 95 Mustang was run. Good Luck!
     
    #2

Share This Page