Hey guys!
Yall may notice I'm posting alot. I have about 2 weeks to get the II in decent enough daily condition until I can start driving my warrior and park this and dive in haha. So I'm trying to keep my posts sectioned in the right threads.
The good news is out of the 3 sites that I've found, yall are the only ones willing to help another II out!
So to start. The guy says the heat blows and the AC is cold, but I started to look and alot of things are weird with the whole system.
I found a rats nest in the driver's vent and cleaned it out today, so that's a start haha. The AC isn't even ran on a belt, so I dunno how he can say it blows cold if it's not hooked up, but that's an easy fix.
Let's start with this:
Is that unit factory? I chased one of the looms and it runs to ac box. There's a thick black (14ga) that's cut open and wrapped in a bunch, and multiple other wires.
The blower motor isn't very loud thus sounds like it doesn't blow alot of air. It goes through all 3 stages so I'm pretty sure its not the resistor pack. Could it be just a weak motor?
And when I was looking under the dash there is a director door link that's disconnected from somewhere. I can't find its mate, or could it just pulled waaayyyy to far away from the heater control box? It's sitting right in the middle of the dash.
Then next are the two weird black pull levers under the dash, they move something, but I dunno what. Is that to move the air to the floor?
I think that's all. For now haha. i hope that wasn't overwhelming and I really hope to hear back as I don't wanna throw money in the dark on parts haha.
Thanks so much guys.
- Brandon
Yall may notice I'm posting alot. I have about 2 weeks to get the II in decent enough daily condition until I can start driving my warrior and park this and dive in haha. So I'm trying to keep my posts sectioned in the right threads.
The good news is out of the 3 sites that I've found, yall are the only ones willing to help another II out!
So to start. The guy says the heat blows and the AC is cold, but I started to look and alot of things are weird with the whole system.
I found a rats nest in the driver's vent and cleaned it out today, so that's a start haha. The AC isn't even ran on a belt, so I dunno how he can say it blows cold if it's not hooked up, but that's an easy fix.
Let's start with this:
Is that unit factory? I chased one of the looms and it runs to ac box. There's a thick black (14ga) that's cut open and wrapped in a bunch, and multiple other wires.
The blower motor isn't very loud thus sounds like it doesn't blow alot of air. It goes through all 3 stages so I'm pretty sure its not the resistor pack. Could it be just a weak motor?
And when I was looking under the dash there is a director door link that's disconnected from somewhere. I can't find its mate, or could it just pulled waaayyyy to far away from the heater control box? It's sitting right in the middle of the dash.
Then next are the two weird black pull levers under the dash, they move something, but I dunno what. Is that to move the air to the floor?
I think that's all. For now haha. i hope that wasn't overwhelming and I really hope to hear back as I don't wanna throw money in the dark on parts haha.
Thanks so much guys.
- Brandon