Ok here is the RIP.. I have the Boost controller pictured it's the TURBOSMART. But I'm running a twin set up with dual port wastegates. Now I know the lower port on the wastegate goes to the turbine compressor. The upper port on the wastegate goes to the controller.. Now with the controller it has a little T junction that comes with it (PIC) and 2 ports on the controller. I T'd off the 2 lines from both upper ports of the wastegate and attached it to the side of that little T with arrow facing the WG's. The lower port on the adjustable controller to the top side of the little T.
So what goes on the other side of that little T.. the instructions say the top port of the controller is suppose to vent to atmosphere ot do i attached that now to the other side of the little T fitting?
CAN SOME ONE PLEASE HELP!!!!
So what goes on the other side of that little T.. the instructions say the top port of the controller is suppose to vent to atmosphere ot do i attached that now to the other side of the little T fitting?
CAN SOME ONE PLEASE HELP!!!!