Car is a 91' GT, it's a daily driver. After not finding someone selling a pair of the no longer made FRPP control arms I bought an old pair off of a 94'. From talking to the techs at MaximumMotorsports they say it's a struggle to get the bushing out without bending or damaging the control arm. Anyone here done the job and have any tricks/tips to pass on?
I found the replacement bushing per another thread, here is the link.
https://www.npdlink.com/store/products/M_5A638_1A-164903-6001.html
Thanks in advance,
Jorge
I found the replacement bushing per another thread, here is the link.
https://www.npdlink.com/store/products/M_5A638_1A-164903-6001.html
Thanks in advance,
Jorge
Last edited: