Just wanting some feedback on this combination.
Here is the list....
stock block studded mains ARP
stock rods ARP bolts
forged TRW std. bore pistons reliefed for 2.02 valves and maybe a 7cc dish
Eddy 6025's studded ARP
Comp Cams 1.7 stud mount RR part # 1048-16
Comp Cams .544" int./.567"ex. 281/284 dur. 112* lobe seperation
Comp Cams race timing set
MSD Ignition
Pullies
Typhoon intake
75mm MAF
75mm TB
30# inj.
SPEC Stage III clutch
SPEC Billet Steel Flywheel
And for right now just a 100 shot and then maybe up it to 175 to 200 shot.
Please give estimates on HP/torque both N/A and juiced.
Thanks for the replies,
Tommy
Here is the list....
stock block studded mains ARP
stock rods ARP bolts
forged TRW std. bore pistons reliefed for 2.02 valves and maybe a 7cc dish
Eddy 6025's studded ARP
Comp Cams 1.7 stud mount RR part # 1048-16
Comp Cams .544" int./.567"ex. 281/284 dur. 112* lobe seperation
Comp Cams race timing set
MSD Ignition
Pullies
Typhoon intake
75mm MAF
75mm TB
30# inj.
SPEC Stage III clutch
SPEC Billet Steel Flywheel
And for right now just a 100 shot and then maybe up it to 175 to 200 shot.
Please give estimates on HP/torque both N/A and juiced.
Thanks for the replies,
Tommy