Humphugger Cruiser Console

Discussion in 'Classic Mustang Specific Tech' started by 331efiblue66, Jun 11, 2013.


  1. 331efiblue66

    331efiblue66 Member

    Joined:
    Oct 11, 2006
    Messages:
    111
    Likes Received:
    0
    Trophy Points:
    17
    Is anyone on here running one of these consoles? If so, can I beg for the opening dimensions for the shifter? Width of opening, length of shifter opening, and overall length of both openings would be awesome.
    I am running a shifter from a '95 cougar xr7 so I can interface with the 4r70w electronics, and it has a much larger bezel. I am probably going to have to modify the divider, and don't want to drop $250 if it requires me to trash the console trying to modify it. Thanks in advance.
  2. Islandboy33

    Islandboy33 Member

    Joined:
    May 8, 2003
    Messages:
    106
    Likes Received:
    1
    Trophy Points:
    19
    I have the Humphugger and the dimensions but the only issue is that I bought mine over 5 years ago and the newer ones look slightly different. These were rough measurements taken as the shifter opening on my Cruiser Console is slightly rounded, not a perfect rectangle. The opening on mine measures 7" long by 4-1/4" wide.
  3. 331efiblue66

    331efiblue66 Member

    Joined:
    Oct 11, 2006
    Messages:
    111
    Likes Received:
    0
    Trophy Points:
    17
    Thanks, that helps.

Share This Page