intake that will fit my maf meter!

[cenok is family]

so i just got this nice BIG 80mm PMAS "velocity" maf meter and neither my bbk cold air piping nor my stock piping will fit it! what's a cheap pipe i can get that will fit it? the only one's ive seen that'll probably fit are the 4" UPR ones and the C&L true flow ones but i'm not trying to spend 125+ on an intake pipe! help please!

 

[GTOreturns]

I use an 80mm with the factory intake. Go to Home Depot and custom fit it. Use your imagination.

 

[Strype]

I use an 80mm with the factory intake. Go to Home Depot and custom fit it. Use your imagination.

+1

If it's 4" you need dropped down to a 3" Home depot will work. However, if you're like me and need the 3.5", then Home Depot won't work. PVC Pipe section is nice to look at though

 

[cenok is family]

I use an 80mm with the factory intake. Go to Home Depot and custom fit it. Use your imagination.

thanks man! i think a home depot trip is in my future...

+1

If it's 4" you need dropped down to a 3" Home depot will work. However, if you're like me and need the 3.5", then Home Depot won't work. PVC Pipe section is nice to look at though

i'm going to use the piping from my BBK cold air kit, the part from the throttle body to the maf meter....i think it's a 3" pipe. i know the part from the maf meter to the filter is 3.5". why can't you do it with 3.5"?