ligh blue and red ECU wire??

[Blakers01GT]

I'm uninstalling my Mafterburner right now and they had to split a light blue and red wire from my ecu harness into 2 wires from the mafterburner. Anyone know what that wire does? because im having a HELL of a time re crimping the wires back to one wire.

 

[GT2000JAY]

If it's light blue w/red stripe in location 88 (should be able to tell by looking at the harness - they faintly number the first and last I believe) it's the signal wire for the MAF. The only other listing for a lb/r wire is position 52 - ignition coil #2, so I'm sure that's not it.

Jay

 

[Blakers01GT]

If it's light blue w/red stripe in location 88 (should be able to tell by looking at the harness - they faintly number the first and last I believe) it's the signal wire for the MAF. The only other listing for a lb/r wire is position 52 - ignition coil #2, so I'm sure that's not it.

Jay

sweet, obviously it's the MAF signal wire

happen to know what the pink and blue wire is while you're at it?

 

[GT2000JAY]

This may help you out now, and in the future....

RIGHT CLICK - SAVE AS

 

[Blakers01GT]

This may help you out now, and in the future....

RIGHT CLICK - SAVE AS

Thanks alot, Jay!