Lumbar Switch
- Thread starter drdino
- Start date
hotcobra03
Active Member
hotcobra03
Active Member
14B691 lumbar adjust switch also central junction box F2.15 15amp hot at all times circuit 566 color DG .in connector C361other wire is black on that harness.
Yes I did. Again many thanks
I think I fried the rocker switch. Several weeks ago, I received a reply that told me to put 12v to the lumbar (rocker) switch. I did this. A bad move if this switch works like a regular on / off switch.
After I replaced the harness ( thanks to your guidance) I tried the lumbar pump but it did not work. I then took the switch out and checked it with a ohm meter. Well, that showed I had an open even when I depressed the rocker switch in either direction.
I called the Ford dealer and they told me that I should have had a complete circuit when I applied the ohmmeter as I did. They told me my lumbar switch was bad.
Any thoughts??
PS - On my other thread - the one you originally answered, I did express my gratitude for your assistance. Nobody else was able to give me the information I needed. Even the Ford dealer was totally uncooperative. They told me to bring the car in so they could diagnose the problem- at their regular fee of course.
I think I fried the rocker switch. Several weeks ago, I received a reply that told me to put 12v to the lumbar (rocker) switch. I did this. A bad move if this switch works like a regular on / off switch.
After I replaced the harness ( thanks to your guidance) I tried the lumbar pump but it did not work. I then took the switch out and checked it with a ohm meter. Well, that showed I had an open even when I depressed the rocker switch in either direction.
I called the Ford dealer and they told me that I should have had a complete circuit when I applied the ohmmeter as I did. They told me my lumbar switch was bad.
Any thoughts??
PS - On my other thread - the one you originally answered, I did express my gratitude for your assistance. Nobody else was able to give me the information I needed. Even the Ford dealer was totally uncooperative. They told me to bring the car in so they could diagnose the problem- at their regular fee of course.
hotcobra03
Active Member
Thanks it means alot.for got to ask is the seat from a cobra?they have a different pump. Something might be missing .lumbar switch plug is 2 wires feed from fuse .your seat switch is feed from battery junction box F1 18 30amp lumbar feed from central junction F2 15 15amp .is their a fuse in cjb not in?how about at plug?
hotcobra03
Active Member
hotcobra03
Active Member
The 4pin plug coming out of carpet both green are power one is lumbar switch power other seat adj .2 different fuses.
I did check the fuses and they are both good. The power lumbar fuse is, as you stated a 15 amp circuit. I have power at both green wires. The seat is from a GT but not a Cobra.
I was able to locate a lumbar rocker switch and should have it in a couple of days. When it gets in, weather permitting, I will install it. Hopefully it will work. I will let you know how it turns out.
Again, thanks for all of your help.
I was able to locate a lumbar rocker switch and should have it in a couple of days. When it gets in, weather permitting, I will install it. Hopefully it will work. I will let you know how it turns out.
Again, thanks for all of your help.
hotcobra03
Active Member
Similar threads
