Need help with Gauges

Discussion in '2.3L (N/A & Turbo) Tech' started by 93ConvertibleLX, Dec 11, 2003.


  1. 93ConvertibleLX

    93ConvertibleLX New Member

    Joined:
    Feb 9, 2003
    Messages:
    101
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Mittengan
    I wanted to get some autometer guages and was wonderin what type of gauges I would need. I know I need some type of tach adapter for the DIS but as far as the speedometer do I need a mech. or electric...also what do I need to hookup other guages such as boost, air/fuel, and temp guages?
  2. rjpetr

    rjpetr New Member

    Joined:
    Dec 18, 2002
    Messages:
    128
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Tampa FL
    Depends upon what you want to monitor. For safety sake, a lot of ppl with turbo 2.3's get an A/F guage though it is not that accurate without a an o2 sensor upgrade.

    The speedo is mechanical, I don't believe the 93 stang came with an electronic pickup for speedo, but you can confirm that yourself by looking for the speedo cable at the drivers side of the tranny.

    I also have gauages to watch oil pressure (the stock oil pressure gauge is not that accurate, water temp again for more accuracy. My boost guage is from Autzone (sunpro I beleive) 0-15 with vac too.

    Rich

Share This Page