New Track times!!!

Discussion in '94-95 Talk' started by svegt, Nov 23, 2005.

  1. svegt New Member

    Member Since:
    Nov 28, 2003
    Message Count:
    35
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Houston, TX
    well decide to take the mustang out on sunday to make some passes!!!

    was a last minute decision to go!!

    Had the CCW's on the back and quickly swapped them out for the e.t. drag radials!!!

    made 3 passes started around 11.86, 11.89 thought i had 16lbs of air in the drag radials!! then finally check them and had 31lbs of air forgot that i let a friend borrow them and he filled them up with air!!!

    so i let them down to 19lbs and got 11.76 at 119.18 with 1.75 60ft
    was my new best!!!!! so i thought!!!!!

    decided to make one more pass and did a long burnout and then staged the car brought the revs about 4500rpms and let it rip!!!!!!!!!!

    60ft was a 1.63 on 16inch drag radials coasted to a 7.43@92.73 1/8mph and got a 11.56 at 118.28 woo hoo was damn excited!!!

    i knew it had it in it just had to get my 60ft in the 1.60s the awesome thing is that i still have alot left in it!!!!

    so now gonna shoot for 10's with dragradials!!!! with a 6speed!!!!

    10's here i come!!!!!!!
  2. Killercanary The car that set the bar.

    Member Since:
    Nov 9, 2000
    Message Count:
    5,723
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Altoona, PA
    WOW! Congrats! What did you change since the times in your sig?
  3. svegt New Member

    Member Since:
    Nov 28, 2003
    Message Count:
    35
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Houston, TX
    well i am still shooting for 11's on motor!!!

    just decide to put on my old 5115 dry kit i had to see if i could use 4.10 with nitrous but i am well into 6100,6200rpms at the finish line with the spray so i think i am going to stay with 3.73 for a while!!!

    ran a 12.93 with a 1.92 60ft at 107.73 with 10*of timing, plugs at .35,and
    44psi fp!!!! so gonna go back here to the track pretty soon with a n/a tune
    and see how low i can go!!!

    car weighs 3300lbs with me in it, prostars runners, and stock ponys with drag radials!!! full tank, i need to get a dynotune to maximize everything on motor!!!
  4. YEAHLOH95 Founding Member

    Member Since:
    Nov 19, 2001
    Message Count:
    1,160
    Likes Received:
    0
    Trophy Points:
    36
    Location:
    EVERETT,PA
    great times i know how it is ,seaching for that 10 sec time slip lol
  5. walker95svt New Member

    Member Since:
    May 22, 2005
    Message Count:
    73
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Abilene, TX
    Oh my god. Do you know what kinda power you're putting down? I'd be pretty psyched up too.......
    congrats:nice:
  6. svegt New Member

    Member Since:
    Nov 28, 2003
    Message Count:
    35
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Houston, TX

    yeah dont know what is puts down on the spray but on motor it did 322/320!!!!!
  7. Redsnk95 Founding Member

    Member Since:
    Feb 4, 2002
    Message Count:
    2,246
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Houston, TX
    Hehe and I have the parts list to make the dry shot handle more power...:) Time to up that shot Frank!

    Troy
  8. yellow1995Cobra New Member

    Member Since:
    Dec 23, 2002
    Message Count:
    2,981
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Massachusetts
    Great times man! Will only go faster from here
  9. svegt New Member

    Member Since:
    Nov 28, 2003
    Message Count:
    35
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Houston, TX

    cool i will swing by the shop next week, see if you all have the boost a pump!!!!

Share This Page