What is the procedure for cleaning the black oil seperator on the side of the engine block?
2.3L 4cyl
Ranger Danger- I have chased the issue to the pcv system. Coming from the back of throttle body runs a tube. The tube goes back, then down a few inches till the pcv valve. Then further down then makin a 90 degree turn foward. Then it makes a 180 into a black oil seperator can stickin off the side of the block. I pulled the hose off the oil seperator can only to find a big black oily turd pokin out the rim of the oil seperator spout. This item is a real pain in the ass to access. It resides under and behind the intake manifold, brake master cylinder and ignition pack. To access it you have to look from above the engine between the arms of the intake manifold, reach from the side, under brake line, and beside the power steerin pump and try to fiddle the turd back out. What is the procedure for
2.3L 4cyl
Ranger Danger- I have chased the issue to the pcv system. Coming from the back of throttle body runs a tube. The tube goes back, then down a few inches till the pcv valve. Then further down then makin a 90 degree turn foward. Then it makes a 180 into a black oil seperator can stickin off the side of the block. I pulled the hose off the oil seperator can only to find a big black oily turd pokin out the rim of the oil seperator spout. This item is a real pain in the ass to access. It resides under and behind the intake manifold, brake master cylinder and ignition pack. To access it you have to look from above the engine between the arms of the intake manifold, reach from the side, under brake line, and beside the power steerin pump and try to fiddle the turd back out. What is the procedure for