Here is a ROMEO PI SWAP kit. The heads,cams and manifold came off a 04 gt with 40,000 miles, i bought a head changing kit from summit that comes with the head gaskets,Exhaust Manifold Gaskets, head bolts, and oil dip stick and the rest of the parts i bought from Tousley Ford. I will take or obo for the PI SWAP. I planed on putting this on my car but after i talked to Bardon at Mo's Speed shop i think im going to go another route with my car. Everything is in good condition.
PARTS INCLUDED:
PI Romeo Heads with Cams
PI Intake Manifold Assembly
SOLD ALL GASKETS AND SEALS
PARTS NEEDED:
Upper Plenum O-Ring – XR3Z-9L437-BA – (1 o-ring)
Thermostat O-Ring – F1VY-8255-A – (1 o-ring)
Water Pump O-Ring – F1VY-8507-A – (1 o-ring)
01+ PI Intake Gasket – YL3Z-9439-BA -(1 each for a total of 2) – or Fel Pro – MS-92121
01+ Cam/Valve Cover Gaskets – F6AZ-6584-AA (RH) and F6AZ-6584-BA (LH) – (1 each)
NGK TR6 Spark plugs
Also needed are valve covers, cam gears and injectors as i was going to use the parts off my 97 gt.
PARTS INCLUDED:
PI Romeo Heads with Cams
PI Intake Manifold Assembly
SOLD ALL GASKETS AND SEALS
PARTS NEEDED:
Upper Plenum O-Ring – XR3Z-9L437-BA – (1 o-ring)
Thermostat O-Ring – F1VY-8255-A – (1 o-ring)
Water Pump O-Ring – F1VY-8507-A – (1 o-ring)
01+ PI Intake Gasket – YL3Z-9439-BA -(1 each for a total of 2) – or Fel Pro – MS-92121
01+ Cam/Valve Cover Gaskets – F6AZ-6584-AA (RH) and F6AZ-6584-BA (LH) – (1 each)
NGK TR6 Spark plugs
Also needed are valve covers, cam gears and injectors as i was going to use the parts off my 97 gt.