Price check with pics :-)

steel1212

Active Member
Jun 24, 2004
1,180
0
36
Frankfort, Ky
Ok here is the background info on this car. Front half has been removed and replaced with a pinto front. Has a 8 point roll cage. Full fiberglass lift off fenders,hood,nose all one piece. 9 inch rear with 4.56 gears. lift off deck lid. Has a 460 and c-6 but does not come with car.

NOw for the pics. SOrry for the poor quality it was raining and the cars tires are flat.

im0021355tj.jpg

im0021282aj.jpg

im0021307rc.jpg

im0021328bg.jpg

im0021330ay.jpg

im0021299hm.jpg

im0021258hv.jpg

im0021260gg.jpg

im0021272cl.jpg


So what do you think it is worth?
 

Attachments

  • im0021355tj.jpg
    im0021355tj.jpg
    7 KB · Views: 35
  • im0021282aj.jpg
    im0021282aj.jpg
    7 KB · Views: 60
  • im0021307rc.jpg
    im0021307rc.jpg
    7 KB · Views: 42
  • im0021328bg.jpg
    im0021328bg.jpg
    7 KB · Views: 47
  • im0021330ay.jpg
    im0021330ay.jpg
    7 KB · Views: 45
  • im0021299hm.jpg
    im0021299hm.jpg
    7 KB · Views: 38
  • im0021258hv.jpg
    im0021258hv.jpg
    7 KB · Views: 35
  • im0021260gg.jpg
    im0021260gg.jpg
    7 KB · Views: 40
  • im0021272cl.jpg
    im0021272cl.jpg
    7 KB · Views: 40
  • Sponsors (?)


On man, that cage is ghetto Fab. I love the angle Iron components.

I'm sure it could be salvaged and made to look like it wasnt put together behind bubba's house.

I'd question the strength of that front half. doesnt look like the most quality installation from here.

How much does he want for it?
 
steel1212 said:
Has a 8 point roll cage. Full fiberglass lift off fenders,hood,nose all one piece. 9 inch rear with 4.56 gears. lift off deck lid.

add all that up new, and see what ya get. 3k sounds ridiculous to me, but i guess that might just be me.
 
BrutalStang said:
add all that up new, and see what ya get. 3k sounds ridiculous to me, but i guess that might just be me.

Sounds ridiculous to me as well....there's a reason that car is sitting where it is...and like it is.... But that's just my train of thought. Ask yourself what is it WORTH to you because that's the real question. Is it worth it to you to give 3K on a car in that shape ? I'd say for 3K you could do better else where with a car alot less cut up.
 
I'm going to have to differ with the overwhelming consensus here, even though I agree its not worth 3K with no engine/trans. The car is certainly worth over $800, as its a fastback and, according to your description, it has way more than $800 in parts if you wanted to part it out or use some of the parts yourself and then part it out. I also agree that the front subrame (if you could even call that a subframe) and cage have deathtrap written all over them. Regardless, the car is worth more than $800 IMO.

The front subframe definitely needs to be redone before you should even drive the car. The cage is ghetto and needs to be redone, although certain parts of it may be fine at certain tracks if you're only looking for a race car. Any and all angle iron as far as structural members or cage strengthening needs to go. I may get :flame: over this, but I think the car is probably worth 2K+, but certainly not 3K.
 
They can be brought back from the dead. I have some before and after pics at the site that will scare you. I gave $700 for mine in the mid 90's and would offer the guy about that for this one.

Keep in mind the rear glass will bring about $500 by itself and the other glass and parts will give you money to buy a nicer car if you decide to go the "parts" route OR you can use this one for parts on another fastback that you might purchase.

A side note - I kinda like the front end set up. Nice touch for a track car.

HistoricMustang
www.historicmustang.com
 
My goal with this one would have been a street car with a big block for an O MY GOD factor. It of course would have to be safe and the cage redone as well as the front end fixed. I don't have these skillls so who knows how much it would cost.