Quick E-brake question

Discussion in 'Fox 5.0 Mustang Tech' started by Repostyle, Nov 5, 2009.

  1. Repostyle Member

    Member Since:
    Jun 11, 2005
    Message Count:
    570
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Portland, OR
    I've posted before about not doing anything with my e-brake after my 5-lug swap since I have an auto. Well, now that I'm doing the T5 swap I need a working e-brake.

    My question is, I have SN95 rear calipers on stock length axles, can I use '93 cobra rear cables? Will they work with the calipers and the '90 front cable? If not, what are my options?
    Repostyle, Nov 5, 2009
    #1

  2. 89gt89 Member

    Member Since:
    May 29, 2005
    Message Count:
    55
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Bothell, WA
    Looks like you're rolling a 91 so the 93 Cobra cable's won't work. However, FMS make a set of cables that will work perfect. I forget the part# but have a set on my 91. Same rear setup that you have. Search the swap threads. All the #'s are there.
    89gt89, Nov 5, 2009
    #2


    Sponsored Ad

  3. Repostyle Member

    Member Since:
    Jun 11, 2005
    Message Count:
    570
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Portland, OR
    Finally found it, and a lot of old links that are no good. But these are the cables for the SN95 rears :lock:
    Repostyle, Nov 5, 2009
    #3

Share This Page