RNH Engine Special

Discussion in 'Vendor Sponsor Forums' started by Rick 91GT, Dec 8, 2011.

  1. I have some excess inventory at the shop, so Ive decided to put the part in some combos for a quick sale my loss is your gain...


    306ci Shortblock
    Probe SRS forged pistons, flat top 4.03" bore (Dual Relief, TFS and Inline)
    Scat 4340 forged I-beam rod, 8740 cap screws
    Stock Crank, turned and polished
    King Main, Rod and Cam bearings
    Total Seal moly ring set ( Can be gapped to any application)
    Stock latemodel HO block, cleaned, decked, bore and hone with torque plates, fully deburred and blueprinted, screw in oil galley, brass freeze plugs, etc
    $1300.00 (NEW PRICE)

    More combos coming!!
     
  2. 331/347 Economy Shortblocks
    Scat 9000 crank
    Scat 4340 I beam rods, 3/8" ARP cap screws
    Forged Pistons (multiple brands available)
    King Bearings
    Total Seal Bearings (multiple brands available)
    Stock latemodel HO block, cleaned, decked, bore and hone with torque plates, fully deburred and blueprinted, screw in oil galley, brass freeze plugs, etc

    starting at $1850.00 ($300 off the for the hoildays!) Cylinder Heads, Intake and other parts available to top off these as well, longblock and crate motors available.

    Want a big inch combo or need something to hold more HP stuffed in a DART block? Need a 2v, 3v or 4v build? Give me a call
     
  3. Neat website! How much for a sheetmetal wing with the center channels to fit an 88 coupe??
     
  4. $189 shipped to your door
     
  5. Nice! And would that be a strutless one?
     
  6. Correct... smooth no spills runs $129 plus shipping, with center spills $169, strut style (quote only)
     
  7. Ok, i assume theres no problem mounting these to a fiberglass trunklid? Its prob gnna b arnd tax time but thats a better deal then what ive seen so i wanna make sure its what i really want and itll work for my app.
     
  8. No others have put them on glass lids with no issues
     
  9. Ok thanks! I posted a couple Wanted parts list in sn95 and fox...check em out and shoot me some prices! My first purchases will be the 4in windshield length hood and moroso fabricated coolant tank for my 88. Then i want the fabricated moroso brake resevoir cover, fuse box cover, and power steering resevoir for my 02.
     
  10. Who needs more power?
     
  11. Some pics
     

    Attached Files:

  12. Extending Sale through March....
     
  13. Turn Key Engines, Long and Short blocks and rotating assemblies, all on sale...
     
  14. I emailed you about getting a motor asap. I haven't herd back.
    Sent from my PI86100 using Board Express