Who has a similar setup and what are you putting down??

[blkcobra50]

I just ordered myself some TFS TW heads and plan on going with a track heat intake. I am building a 331 with a 10:1 CR and an E-303 cam. Anyone have a similar setup or know who does that would like to share numbers? Thanks

 

[5.0Droptop]

e cam is to small. Do a tfs2 and youll like it.

I have a 347 with track heat heads and holley systemax and tfs2 i made 340/410 to wheels.

 

[blkcobra50]

e cam is to small. Do a tfs2 and youll like it.

I have a 347 with track heat heads and holley systemax and tfs2 i made 340/410 to wheels.

I need emissions and a free brand new E-cam works for me PLus going with 1.7 rockers

 

[retro50]

Just because you need emissions & use an emmissions legal cam doesn't mean it will pass. The cam is all wrong for that set-up. I made 390 H.P./362 TQ. from a 337 stroker recently with a 4 bbl carb. And a dual plane intake. It doesn't pass emissions but it sure runs good. Talk to one of the cam grinders and see if they have something that will work. Without compromising your h.p. & torque. If your spending the money for the stroker what's a couple of hundred bucks more for a cam that will work for you.