I just had a Pioneer AVIC N-2 installed but there are a couple issues. Can any one tell me where the speed pulse signal wire can be found and what it looks like?
Thanks
Thanks
Militarymustang said:I just had a Pioneer AVIC N-2 installed but there are a couple issues. Can any one tell me where the speed pulse signal wire can be found and what it looks like?
Thanks
Militarymustang said:I hope I can find it, there are some minor issues I have to take the car back in for tomorrow. Being stationed in Germany, this is the first 05 Mustang they have worked on. As a result, there are a few bugs. Like they somehow disconnected my heater controls, I'm getting an "excessive vibration " message on the unit, and a couple other minor things. I'm taking the car back to the installers tomorrow, but I'd love know where that speed pulse signal wire is so I don't have to have the dash opened up again later. And the external sensor from Pioneer is another $250.
Militarymustang said:I just had a Pioneer AVIC N-2 installed but there are a couple issues. Can any one tell me where the speed pulse signal wire can be found and what it looks like?
Thanks
Followup on VSS. Hawgman was correct in identifying the Dark Blue/Yellow Tracer wire in the top plug next to the fuse box as being VSS. I verified that today. The Eclipse AVN5435 has a Check Settings screen on the Navigation menu. "Speed Pulse" will tell you if you have it connected correctly. If it shows your cars speed as you are moving (mine did) then you have it connected. The wiring diagram for the Shaker 500 that I saw somewhere else on this form is not correct for the 2005 Mustand. Pin 14 has no connection.
gp001 said:I will merely post what I read on another forum
Hope it helps