x303 cam info...

Discussion in '1994 - 1995 Specific Tech' started by bill302, Sep 27, 2007.


  1. bill302

    bill302 New Member

    Joined:
    Nov 3, 2005
    Messages:
    2,141
    Likes Received:
    0
    Trophy Points:
    0
    x303 cam who runs one with a faily stock motor and whats needed to run one see my signature below??? i already know ill need stiffer valve springs i can use crane cams part # 96870...
    #1
  2. VIPRETR

    VIPRETR New Member

    Joined:
    Mar 10, 2007
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    0
    That's a big cam for E7 heads, even ported I wouldn't think they would flow much past .500 lift. The X-cam is .542 lift IIRC. I would think a smaller cam like the F303 would be a better match. Whatever cam you choose, you will need to upgrade valvesprings, and have the pistons notched.
    #2
  3. mojopony

    mojopony New Member

    Joined:
    Sep 9, 2007
    Messages:
    71
    Likes Received:
    0
    Trophy Points:
    0
    X cam in a stock motor won't be much fun to drive.
    #3

Share This Page