I'm puting a 5.0 from an 1988 in a 1993
I have a 5.0 main wiring harness that I purchased @ a swap meet. I'm guessing this main harness is from a 1990 (air bag connectors and Fuel pump relay is by mass air connector). This main harness has dual dash connectors(by the diagnostic port).
The car I would like to put this main harness (with dual dash connectors) into is a 1993 2.3 coupe. This car has one dash connector. I've done some research and I think that I only NEED to hook up three wires to the single 8 pin connector. That is on the 1993.
What I would like to know is if ANYONE can tell me what specific wire colors from my dual dash connector will hook up to my 93 single connector. I have looked @ the FRPP brown connector (i think #31). Those wire colors are not all the same as my options.
If nobody can do that. Can someone tell me what pins to hook the single (8pin) dash connector to my A9L
I have a 5.0 main wiring harness that I purchased @ a swap meet. I'm guessing this main harness is from a 1990 (air bag connectors and Fuel pump relay is by mass air connector). This main harness has dual dash connectors(by the diagnostic port).
The car I would like to put this main harness (with dual dash connectors) into is a 1993 2.3 coupe. This car has one dash connector. I've done some research and I think that I only NEED to hook up three wires to the single 8 pin connector. That is on the 1993.
What I would like to know is if ANYONE can tell me what specific wire colors from my dual dash connector will hook up to my 93 single connector. I have looked @ the FRPP brown connector (i think #31). Those wire colors are not all the same as my options.
If nobody can do that. Can someone tell me what pins to hook the single (8pin) dash connector to my A9L
